|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 120 × 120 × 20 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines installation, service, and cleaning constraints for the sintered porous titanium foam sheet. Conformance with media compatibility, temperature, and surface-protection requirements is required for reliable operation.
- Media and operating parameter verification: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation or quotation.
- Service temperature limit: Do not operate the sheet above the recommended service temperature of 300°C.
- Surface protection: Protect the porous surface from crushing and contamination during handling, installation, and maintenance.
- Cleaning compatibility: Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
- Assembly integration: Cutting, welding, and basic machining may be used for assembly integration without compromising the porous structure.
This procedure describes the recommended handling and cleaning workflow for the sintered porous titanium foam sheet. The selected cleaning method must match the process medium and operating procedure.
Required Equipment: Backflush pump, Steam generator, Ultrasonic cleaner, Chemical cleaning bath
- Inspect sheet
Inspect the sintered sheet for visible damage, blocked pores, or contamination before handling. - Protect porous surface
Protect the porous surface from crushing and contamination during handling and placement in the assembly. - Select cleaning method
Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure. - Apply cleaning method
Apply the chosen cleaning method to remove retained solids and process residues from the porous structure. - Verify cleanliness
Verify that the sheet is clean and free of debris before reinstalling it in the filtration assembly.
How does the 20 µm filtration rating compare to the 40 PPI pore density on this sintered titanium foam sheet?
The 20 µm filtration rating and 40 PPI pore density describe different aspects of the sheet. The 20 µm rating specifies the particle size retention capability, while 40 PPI indicates the cellular pore density (pores per inch). The approximate cell spacing for 40 PPI is 0.64 mm, with a porosity of 35–45%. Both values must be reviewed together when matching the sheet to an assembly, as noted in the product configuration note.
What is the maximum recommended service temperature for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, but media compatibility, operating pressure, and temperature should be reviewed before installation. The sheet is suitable for applications such as gas purification, chemical processing, and thermal management within this temperature limit.
What cleaning methods are recommended for this porous titanium foam sheet after use?
Acceptable cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination during handling and storage. The metallic construction supports cutting, welding, and basic machining for assembly integration.
This sintered porous titanium foam sheet provides 20 µm filtration and 40 PPI cellular structure in a 120×120×20 mm format, with 35–45% porosity for low-resistance flow. Its titanium construction enables corrosion resistance, thermal stability to 300°C, and cleanability, but the porous surface requires careful handling and the temperature limit restricts high-temperature applications.
Positive
- 20 µm filtration with 40 PPI structure: Combines 20 µm filtration rating with 40 PPI cellular structure, providing balanced filtration precision and open flow pathways for solid-liquid and gas separations.
- Corrosion-resistant and cleanable titanium: Titanium construction offers corrosion resistance and thermal stability up to 300°C, and supports backflushing, steam, ultrasonic, and chemical cleaning for reuse.
Trade-offs
- Limited to 300°C service temperature: Maximum recommended service temperature of 300°C restricts use in high-temperature filtration or catalytic processes.
- Surface vulnerable to crushing and contamination: The porous structure requires careful handling to avoid crushing or contamination, necessitating protective measures during installation and operation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
