|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 120 × 120 × 10 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet requires compatibility verification before service in any filtration assembly. The porous structure must be protected from crushing, contamination, and incompatible operating conditions during handling, cleaning, and installation.
- Media and Operating Compatibility: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance with the intended assembly before installation.
- Service Temperature Limit: Maintain service temperature at or below 300°C to preserve the sintered porous structure's integrity.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Cleaning Compatibility: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly Processing: Cutting, welding, and basic machining are acceptable assembly integration options only when performed without collapsing or contaminating the porous surface.
This procedure covers pre-installation confirmation, surface protection, and cleaning selection for a sintered porous titanium sheet. These steps are intended to preserve the porous structure and avoid contamination during service.
Required Equipment: Backflushing system, Steam cleaner, Ultrasonic cleaner, Compatible chemical cleaning agent
- Confirm service conditions
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility with the intended assembly before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during unpacking, handling, and installation. - Select the cleaning method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
How does the 20 µm filtration rating interact with the 60 PPI pore density in terms of separation efficiency and flow resistance?
The 20 µm filtration rating specifies the particle size retention, while the 60 PPI (pores per inch) indicates cellular density. The interconnected porous structure with 35–45% porosity and ~0.42 mm cell spacing supports low flow resistance, with a relative air permeability of 1×10⁻⁴ L/(cm²·min·Pa). This combination allows stable separation while maintaining open pathways for flow.
What are the maximum service temperature and integration capabilities for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The sheet can be cut, welded, and machined for assembly integration. Its titanium-based construction provides corrosion resistance and thermal stability in compatible media, but media compatibility, operating pressure, and temperature must be reviewed before installation.
What cleaning and handling procedures are recommended for the 20 µm porous titanium foam sheet to maintain filtration performance?
Protect the porous surface from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium. The metallic structure supports reuse when cleaned appropriately.
Evaluation of the Atomfair AF-T60-E1020 sintered porous titanium foam sheet (120 × 120 × 10 mm, 20 µm filtration rating, 60 PPI) confirms a 35–45% interconnected through-pore structure with an estimated bulk density of 2.48–2.93 g/cm³, suited to solid-liquid, gas-solid, and gas-liquid separation within a ≤300°C service envelope.
Positive
- Interconnected porosity with 20 µm retention: The sintered titanium framework provides 35–45% open porosity with roughly 0.42 mm cell spacing at 60 PPI, supporting solid-liquid, gas-solid, and gas-liquid separation while preserving low flow resistance and uniform pore distribution.
- Corrosion-resistant and cleanable metallic structure: The titanium-based structure offers corrosion resistance and thermal stability in compatible media, and it can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures, enabling reuse under suitable process conditions.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation.
- Porous surface requires crush and contamination protection: The porous surface must be protected from crushing and contamination during handling, and the cleaning method must be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
