|
Sintered Titanium and Porous Titanium Foam Sheet, 20 µm Filtration Rating, 100 × 200 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium structure is susceptible to crushing and contamination if the surface is not protected during handling and storage. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation to prevent structural degradation or process failure.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and storage.
- Media Compatibility Review: Confirm media compatibility, operating pressure, temperature, and target flow before installation.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid material degradation.
Proper handling and cleaning preserve the porous structure and filtration performance of the titanium foam sheet. Select a cleaning method based on the process medium and operating procedure to avoid damage.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet in the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method to remove trapped particulates without damaging the porous structure. - Rinse and dry the sheet
Rinse the sheet with compatible solvent and dry it thoroughly before reuse or storage.
How does the 20 µm filtration rating correlate with the 20 PPI pore density in this sintered titanium foam sheet?
The 20 µm filtration rating and 20 PPI (pores per inch) are independent parameters that describe different aspects of the sheet. The PPI value indicates the cellular structure density—approximately 1.27 mm cell spacing for 20 PPI—while the micrometre value specifies the filtration precision achieved through the interconnected porous network. The sheet's 35–45% porosity and open-pore structure enable stable separation at 20 µm despite the relatively coarse PPI rating. Both values must be reviewed together when matching the sheet to a specific assembly.
What are the operating temperature and media compatibility limitations for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C, as stated in the technical specifications. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, but specific media compatibility must be verified against the process fluid, operating pressure, and target flow before installation. The manufacturer advises reviewing media compatibility, operating pressure, temperature, and dimensional tolerance prior to quotation.
What cleaning and handling procedures are recommended for maintaining this porous titanium foam sheet?
The porous surface must be protected from crushing and contamination during handling. Acceptable cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical cleaning procedures, chosen according to the process medium and operating procedure. The metallic construction also supports cutting, welding, and basic machining for integration into assemblies.
This sintered porous titanium foam sheet (20 µm filtration rating, 20 PPI, 100 × 200 × 3 mm) offers a corrosion-resistant, cleanable metallic filter medium with interconnected porosity (35–45%) and low flow resistance, suitable for solid-liquid and gas separation in laboratory and engineered assemblies, though its 300°C service temperature limit and sensitivity to surface crushing require careful process integration.
Positive
- Corrosion-resistant titanium construction: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, enabling use in aggressive chemical, pharmaceutical, and seawater-treatment environments.
- Cleanable and reusable metallic filter: The metallic construction supports backflushing, steam, ultrasonic, and chemical cleaning procedures, allowing repeated use and reduced consumable waste in continuous filtration operations.
Trade-offs
- Limited service temperature of 300°C: The recommended service temperature is ≤300°C, which restricts deployment in high-temperature gas filtration or thermal-management applications exceeding this threshold.
- Porous surface vulnerable to crushing: The porous surface must be protected from crushing and contamination during handling and installation, requiring careful assembly procedures to maintain filtration integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
