|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Sintered porous titanium foam sheet requires handling measures that preserve its interconnected porous structure. Process media, operating pressure, temperature, and target flow must be verified as compatible before installation.
- Media compatibility verification: Confirm that the process medium, operating pressure, temperature, target flow, and dimensional tolerance are compatible with the sheet before installation.
- Service temperature limit: Maintain process temperatures at or below 300°C in accordance with the recommended service limit.
- Surface protection: Protect the porous surface from crushing and contamination during handling and cleaning.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Configuration review: Review the PPI cellular structure and the micrometre filtration rating together when matching the sheet to an assembly.
This procedure covers handling and cleaning a sintered porous titanium foam sheet for filtration or laboratory use. The steps prioritize surface protection and process compatibility to minimize contamination and mechanical damage.
Required Equipment: Backflushing apparatus, Steam cleaner, Ultrasonic bath, Compatible chemical cleaning agents
- Protect the porous surface
Protect the porous surface from crushing and contamination during handling and cleaning. - Verify compatibility
Verify media compatibility, operating pressure, temperature, and target flow against the process conditions before installation. - Select cleaning method
Select a cleaning method among backflushing, steam, ultrasonic, or compatible chemical procedures according to the process medium. - Confirm cleaning compatibility
Confirm that the selected cleaning method is compatible with the process medium and operating procedure before proceeding.
How does the 110 PPI pore density relate to the 100 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure's density, while the 100 µm filtration rating defines the particle size the sheet can retain. Both must be matched together to the application: the PPI influences flow resistance and mechanical strength, and the filtration rating sets the separation cut-off. The product’s 35–45% porosity and ~0.23 mm cell spacing support the 100 µm rating by providing interconnected flow paths, but the two parameters are not interchangeable and should be individually reviewed for the target assembly.
What are the temperature and pressure limits for the Atomfair AF-T110-D05100 sintered titanium foam sheet?
The recommended service temperature is ≤300°C based on the titanium and titanium-alloy construction. Pressure limits are not explicitly stated in the product specifications; they depend on the assembly design, sealing method, and media compatibility. The sheet’s metallic porous structure provides corrosion resistance and thermal stability, but operating pressure must be evaluated for the specific installation before use.
What cleaning methods are recommended for the sintered titanium foam sheet to avoid damaging the porous structure?
Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, selected according to the process medium and operating procedure. The porous surface must be protected from crushing and contamination during handling. These methods allow reuse of the sheet while preserving the 100 µm filtration rating and 110 PPI cellular structure.
This 160×160×5 mm sintered titanium foam sheet is assessed at a 100 µm filtration rating with a 110 PPI open-cell structure, approximately 0.23 mm cell spacing, and 35–45% interconnected porosity, making it applicable for liquid/gas separation, catalyst recovery, and porous-electrode studies within a ≤300°C service envelope.
Positive
- 100 µm rating with 110 PPI network: The sheet combines a 100 µm filtration rating with a 110 PPI cellular structure and roughly 0.23 mm cell spacing, providing controlled particulate retention while preserving interconnected open pathways for solid-liquid, gas-solid, and gas-liquid separation.
- Interconnected porosity supports cleaning and integration: The 35–45% interconnected porosity contributes to low flow resistance and cleanability; the metallic structure can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures and can be cut, welded, or machined for assembly integration.
Trade-offs
- Porous surface needs crush and contamination protection: The porous titanium surface must be protected from crushing and contamination during handling and storage, and the cleaning method must be selected according to the process medium and operating procedure.
- Service temperature limited to 300°C: Recommended service temperature is capped at 300°C, and media compatibility, operating pressure, target flow, temperature, and dimensional tolerance must be reviewed before installation or quotation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
