|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 20 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet is a passive metallic filter medium intended for use in compatible process media. Recommended service temperature must remain at or below 300 °C, and the porous surface must be protected from crushing and contamination.
- Service Temperature Limit: Recommended service temperature must remain at or below 300 °C.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Media Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
This procedure covers handling and cleaning of a sintered porous titanium sheet. It focuses on protecting the porous surface and selecting a compatible cleaning method.
Required Equipment:
- Review application compatibility
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect the porous surface
Protect the porous surface from crushing and contamination during handling and installation. - Select a cleaning method
Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
What is the difference between PPI and filtration rating in this sintered titanium foam sheet?
PPI (pores per inch) describes the cellular structure, while the filtration rating (100 µm) describes the precision of particle retention. For this sheet, the 20 PPI structure yields approximately 1.27 mm cell spacing and 35–45% porosity, while the 100 µm rating refers to the filtration efficiency. Both values must be reviewed together when matching the sheet to an assembly, as they describe different aspects of the material's performance.
What is the maximum operating temperature for this titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability within this limit, but media compatibility, pressure, and other operating conditions should be reviewed before installation.
Can this porous titanium sheet be machined or welded for assembly integration?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during handling and processing. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures depending on the process medium.
This 160 × 160 × 20 mm sintered titanium foam sheet combines a 100 µm filtration rating with a 20 PPI cellular structure, providing interconnected 35–45% porosity and metallic cleanability for laboratory filtration and separation trials. Evaluation confirms the need to observe the ≤300°C service limit and protect the porous surface from crushing or contamination.
Positive
- Interconnected porous titanium structure: High-vacuum sintered titanium foam sheet provides 35–45% porosity with interconnected through-pore paths, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Corrosion-resistant, cleanable, and machinable: The titanium-based porous structure resists corrosion and heat in compatible media and can be cleaned by backflushing, steam, ultrasonic, or chemical methods; metallic construction also permits cutting, welding, and basic machining for assembly integration.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so the sheet must not be used above this limit without explicit engineering review.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination, and the cleaning method must be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
