|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 15 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This porous titanium sheet requires handling procedures that prevent surface crushing, contamination, and pore blockage before or during service. The material's corrosion resistance and thermal stability apply only within compatible media and at service temperatures at or below 300°C.
- Surface Protection: Protect the porous surface from crushing and contamination during storage, handling, and installation to preserve filtration performance.
- Cleaning Compatibility: Select backflushing, steam, ultrasonic, or chemical cleaning only after verifying compatibility with the process medium and operating procedure.
- Media Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Mechanical Modification: Support the sheet during cutting, welding, or basic machining to avoid distorting the sintered porous structure.
- Service Temperature Limit: Maintain service temperatures at or below 300°C to avoid compromising the sintered titanium structure.
Use this procedure when integrating the sintered titanium sheet into a filtration assembly and when cleaning it after service. Each step protects the porous structure from crushing, contamination, and process incompatibility.
Required Equipment: Clean, lint-free gloves, Flat support surface, Ultrasonic cleaning bath, Backflushing system
- Inspect the sheet
Inspect the received sheet for visible damage, contamination, or blocked pores before installation. - Handle the sheet safely
Handle the sheet with clean gloves and place it on a flat support surface to prevent localized crushing of the porous structure. - Confirm process compatibility
Confirm process media compatibility and verify that operating pressure, temperature, and target flow are within recommended limits before installing the sheet. - Install the sheet
Install the sheet into the assembly without over-torquing seals or applying point loads to the porous face. - Clean after service
Clean the sheet after service using backflushing, steam, ultrasonic, or compatible chemical methods as dictated by the process medium. - Dry the sheet
Dry the cleaned sheet thoroughly before storage to prevent contamination or residual media buildup. - Store the sheet
Store the cleaned sheet in a clean, dry environment with its porous surfaces protected from impact and contamination.
How do the 100 µm filtration rating and 20 PPI pore density relate to each other in this sintered titanium foam sheet?
The 100 µm filtration rating specifies the particle size retained, while the 20 PPI (pores per inch) indicates the cellular structure density. The 20 PPI yields approximately 1.27 mm cell spacing and 35–45% porosity, which together determine flow resistance. The sheet is designed to balance filtration precision with open flow paths, as indicated by the interconnected porous structure and air permeability range of 1.5–800 m³/(h·m²·kPa). Both values must be reviewed together when matching the sheet to an assembly.
What are the recommended operating temperature and media compatibility constraints for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but media compatibility must be reviewed before installation. The sheet can be cut, welded, and machined for assembly integration, and cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures. For specific media, consult technical sales.
What handling precautions and cleaning procedures are recommended for this porous titanium foam sheet to maintain its filtration performance?
Protect the porous surface from crushing and contamination to avoid compromising the interconnected pore structure. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical cleaning, depending on the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for integration, but care must be taken not to deform the porous matrix.
This sintered titanium foam sheet is specified at 100 µm filtration with a 20 PPI structure, 35–45% interconnected porosity, and a 160 × 160 × 15 mm envelope, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance; the stated ≤300°C service limit and required protection of the porous surface from crushing are the main deployment constraints.
Positive
- Interconnected porosity with low flow resistance: The 35–45% porosity and approximately 1.27 mm cell spacing form interconnected passages that support liquid/gas separation while preserving open flow paths and low flow resistance.
- Corrosion-resistant and reusable titanium media: The titanium-based porous structure provides corrosion resistance and thermal stability, and backflushing, steam, ultrasonic, or compatible chemical cleaning allows reuse in suitable process conditions.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require confirmation of compatibility before installation.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination, and cleaning method must be selected according to process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
