|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 10 mm, 60 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Confirm media compatibility, operating pressure, and operating temperature before installing the sheet in a filtration or separation assembly. Protect the porous structure from crushing and contamination, and select cleaning procedures according to the process medium and operating procedure.
- Compatibility review: Verify chemical media compatibility, operating pressure, and operating temperature before installation.
- Porous surface protection: Protect the porous surface from crushing and contamination during handling and storage.
- Cleaning method selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Thermal operating limit: Do not exceed the recommended service temperature when operating the sheet in a process assembly.
Confirm process compatibility and inspect the sheet before installation to avoid damaging the porous structure. Integrate the sheet into the assembly, then clean it with a method suited to the process medium.
Required Equipment: Ultrasonic cleaner
- Verify installation parameters
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before integrating the sheet into an assembly. - Inspect the porous surface
Inspect the delivered sheet for visible crushing or contamination on the porous surface before installation. - Integrate into the assembly
Cut, weld, or machine the metallic sheet for assembly integration when required. - Select a cleaning method
Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
What is the relationship between the 60 PPI pore density and the 100 µm filtration rating in this sintered titanium foam sheet?
The 60 PPI (pores per inch) and 100 µm filtration rating are independent parameters. PPI describes the cellular structure—approximately 0.42 mm cell spacing—while the micrometre value specifies the particle size retention threshold. For this sheet, the 60 PPI structure provides the framework, and the 100 µm rating ensures particles larger than 100 µm are retained. Both values must be reviewed together to match the sheet to the target separation and flow requirements.
What are the temperature and pressure limitations for using this sintered titanium foam sheet in filtration applications?
The recommended service temperature is ≤300°C. The product description does not specify a maximum operating pressure; it states that operating pressure, along with media compatibility, target flow, and dimensional tolerance, should be reviewed before quotation or installation. The allowable pressure will depend on the specific assembly, sealing method, and application conditions.
How should this porous titanium foam sheet be cleaned and handled to maintain its filtration performance?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The porous surface must be protected from crushing and contamination to preserve the interconnected pore structure. Proper handling includes avoiding impacts that could deform the 10 mm thick sheet or block the 35–45% porosity passages.
This 160 × 160 × 10 mm sintered porous titanium sheet is specified at 100 µm filtration with a 60 PPI cellular structure, giving an interconnected 35–45% porosity network for separation and flow applications. It offers corrosion-resistant, cleanable titanium construction but is limited to 300°C service and requires careful handling to protect the porous surface.
Positive
- Interconnected 35–45% porosity network: The 60 PPI structure yields approximately 0.42 mm cell spacing and interconnected through-pores, supporting solid-liquid, gas-solid and gas-liquid separation while preserving open flow pathways and low flow resistance.
- Corrosion-resistant and cleanable titanium construction: The titanium-based porous structure provides corrosion resistance and heat tolerance in compatible media, and the sheet can be cleaned by backflushing, steam, ultrasonic or compatible chemical methods for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature filtration, gas purification or thermal-management applications would exceed the stated operating limit.
- Porous surface requires crush and contamination protection: The open-pore structure must be protected from crushing and contamination during handling and installation. Cleaning method should be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
