|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 120 × 120 × 20 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sintered titanium foam sheet must be installed only after the process medium, operating pressure, target flow, temperature, and dimensional tolerance have been reviewed for compatibility. Protect the interconnected porous structure from crushing, contamination, and incompatible cleaning methods during handling and service.
- Porous Structure Protection: Protect the porous surface from crushing and contamination because mechanical damage or blockage alters filtration uniformity and flow behavior.
- Media Compatibility Verification: Confirm that the process medium is compatible with the titanium or titanium-alloy material before installation to avoid corrosion or media degradation.
- Service Temperature Limit: Keep the operating temperature within the recommended service limit of 300°C to avoid degrading the sintered metallic structure.
- Cleaning Method Selection: Choose backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
This procedure describes pre-installation verification, safe installation, and cleaning of the sintered titanium foam sheet. Confirm service compatibility before installation and keep the porous surfaces protected from crushing and contamination throughout handling.
Required Equipment: Backflushing apparatus, Steam cleaning equipment, Ultrasonic cleaning bath
- Verify service compatibility
Verify that the intended filtration duty, operating pressure, temperature, and media are compatible with the sheet's documented ratings before installation. - Inspect the sheet
Inspect the sintered sheet for visible crushing, deformation, or contamination on the porous surfaces before handling. - Install without point loading
Install the sheet into the assembly so the porous body is not crushed, point-loaded, or blocked by the housing. - Select cleaning method
Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure. - Confirm clean porous surfaces
Confirm the cleaned porous surfaces are free of debris and residue before returning the sheet to service.
What is the relationship between PPI and filtration rating in this sintered titanium foam sheet?
The 40 PPI value describes the cellular structure (approximately 0.64 mm cell spacing), while the 100 µm value describes the filtration precision. Both parameters must be reviewed together when matching the sheet to an assembly, as the 35–45% porosity and interconnected open-pore structure influence flow and separation, not just the micron rating alone.
What are the maximum service temperature and material compatibility considerations for this porous titanium sheet?
The recommended service temperature is ≤300°C. The sheet is fabricated from titanium or titanium alloy via powder forming and high-vacuum sintering, providing corrosion resistance and thermal stability in compatible media. Media compatibility, operating pressure, and temperature must be reviewed before installation, as the metallic porous structure supports solid-liquid, gas-solid, and gas-liquid separation under appropriate conditions.
What cleaning and handling procedures are recommended for this sintered titanium foam sheet?
Protect the porous surface from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for integration, but the foam structure must be handled carefully to avoid damaging the interconnected pore network.
This 120 × 120 × 20 mm sintered titanium foam sheet offers 100 µm filtration precision through a 40 PPI interconnected porous network at 35–45% porosity, combining low flow resistance with corrosion and thermal tolerance for liquid-solid, gas-solid, and gas-liquid separation applications. Operational use is constrained by a recommended service temperature of ≤300°C and a requirement to verify media compatibility, pressure, flow, and dimensional tolerance before installation.
Positive
- Interconnected porous flow network: The 40 PPI sintered titanium structure with approximately 0.64 mm cell spacing and 35–45% porosity maintains interconnected through-pores, supporting 100 µm filtration with low flow resistance in solid-liquid, gas-solid, and gas-liquid separation.
- Corrosion-resistant, cleanable metallic media: Titanium-based construction provides corrosion resistance and heat tolerance in compatible media, while backflushing, steam, ultrasonic, and compatible chemical cleaning options support reuse and maintenance.
Trade-offs
- Surface damage and contamination risk: The porous surface must be protected from crushing and contamination during handling and assembly because mechanical deformation or blocked pores can compromise filtration paths and separation performance.
- Process compatibility verification required: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation, and recommended service temperature is limited to ≤300°C.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
