|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 120 × 120 × 10 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet requires compatibility review before installation. Its porous structure must be protected from crushing and contamination during handling and cleaning.
- Service Temperature Limit: Do not exceed a recommended service temperature of 300°C.
- Media Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and assembly.
- Cleaning Compatibility: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Machining Integration: Metallic construction can support cutting, welding, and basic machining for assembly integration.
This procedure covers safe handling and cleaning of the sintered porous titanium sheet. Steps are based on the manufacturer's stated handling and cleaning guidance.
Required Equipment: Backflushing equipment, Steam cleaning equipment, Ultrasonic bath, Compatible chemical cleaning agents
- Confirm compatibility
Confirm the filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect porous surface
Protect the porous surface from crushing and contamination during handling and assembly. - Select cleaning method
Select a cleaning method from backflushing, steam, ultrasonic, or compatible chemical procedures according to the process medium and operating procedure.
How does the 30 PPI cellular structure relate to the 100 µm filtration rating in this sintered titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular density of the porous structure, while the 100 µm rating indicates the filtration precision. These two parameters are independent but complementary: the 30 PPI structure with approximately 0.85 mm cell spacing provides the open porous framework, while the 100 µm rating defines the particle size retention. Both values must be reviewed together when matching the sheet to a specific filtration assembly.
Can this 120×120×10 mm sintered titanium foam sheet be machined or cut for custom assembly integration?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. However, care must be taken to protect the porous surface from crushing and contamination during processing. The sheet is supplied as a single piece, and custom dimensions are available upon consultation with the manufacturer.
What cleaning methods are recommended for the sintered porous titanium foam sheet to maintain its filtration performance?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination during handling and cleaning. The titanium structure provides corrosion resistance and thermal stability up to ≤300°C, supporting repeated cleaning cycles.
This 100 µm, 30 PPI sintered titanium foam sheet (120 × 120 × 10 mm, model AF-T30-E10100) offers interconnected 35–45% porosity with corrosion resistance, cleanability, and a ≤300°C service limit for filtration and flow-distribution trials. Its metallic structure can be cut, welded, or machined, but the porous surface must be protected from crushing and contamination.
Positive
- Interconnected 35–45% porosity with low flow resistance: The 30 PPI sintered titanium sheet retains interconnected through-pores at 35–45% porosity and roughly 0.85 mm cell spacing, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance. The stated air permeability range of 1.5–800 m³/(h·m²·kPa) aligns with this porous metallic format.
- Corrosion resistance, thermal stability, and cleanability: The titanium-based porous structure provides corrosion resistance and thermal tolerance up to 300°C in compatible media, while the metallic body can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures. Cutting, welding, and basic machining are supported for integration into filtration assemblies.
Trade-offs
- 300°C service temperature ceiling: Recommended service temperature is limited to ≤300°C, so applications above this range are outside the stated operational envelope and require alternative material selection. Heat tolerance is conditional on compatible media and process conditions.
- Porous surface requires crush and contamination protection: The 120 × 120 × 10 mm sheet has an open porous structure, and handling instructions require protecting the surface from crushing and contamination. Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be confirmed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
