|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 100 × 200 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet is intended for filtration and separation service only under verified process conditions. Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be confirmed before installation.
- Media Compatibility Review: Confirm that the process medium is compatible with the titanium or titanium-alloy structure before use.
- Pressure and Temperature Verification: Verify that the intended operating pressure and temperature remain within the documented service limits for the sheet.
- Porous Surface Protection: Protect the porous surface from crushing and contamination during handling and installation.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or chemical cleaning only after confirming compatibility with the process medium and operating procedure.
- Assembly Integration Check: Confirm that any cutting, welding, or basic machining performed for assembly integration remains within the sheet's reviewed dimensional tolerance.
This procedure covers pre-installation verification, surface protection, and cleaning selection for the sintered porous titanium sheet. Confirm process-specific medium compatibility and operating conditions before exposing the sheet to service.
- Confirm Service Parameters
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Review Structural and Filtration Ratings
Review the PPI and micron rating together when matching the sheet to the intended assembly. - Protect Porous Surface
Protect the porous surface from crushing and contamination during handling and installation. - Select Cleaning Method
Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
What is the relationship between the 30 PPI cellular structure and the 100 µm filtration rating in this sintered titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular density with an approximate cell spacing of 0.85 mm, while the 100 µm rating specifies the particle size retained. The PPI defines the structural matrix and overall flow path geometry, and the micron value defines the filtration cutoff. Both parameters must be reviewed together when matching the sheet to an assembly, as stated in the product configuration note.
What are the recommended service temperature limits and what are the implications for media compatibility?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, but media compatibility, operating pressure, and target flow must be reviewed before installation. Specific chemical resistance at elevated temperatures should be confirmed for the intended process medium.
What cleaning methods are recommended for this porous titanium sheet to maintain filtration performance?
Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, and compatible chemical procedures. The porous surface must be protected from crushing and contamination during handling. The cleaning method should be chosen according to the process medium and operating procedure to avoid damaging the interconnected pore structure.
This 100 µm, 30 PPI sintered porous titanium foam sheet in a 100 × 200 × 5 mm format combines 35–45% interconnected porosity with a titanium-based metallic framework for filtration and flow-distribution studies; its ≤300°C service ceiling and need for crush and contamination protection define its practical installation and cleaning limits.
Positive
- Interconnected porous titanium structure: The 35–45% porosity, approximately 0.85 mm cell spacing, and 100 µm filtration rating provide interconnected through-pore flow paths, supporting low-resistance solid-liquid, gas-solid, and gas-liquid separation within the 100 × 200 × 5 mm sheet.
- Cleanable and machinable metallic construction: The titanium-based porous structure can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures, and it supports cutting, welding, and basic machining for integration into filtration or flow-distribution assemblies.
Trade-offs
- 300°C maximum service temperature: Recommended service temperature is limited to ≤300°C; buyers must verify operating temperature, pressure, media compatibility, target flow, and dimensional tolerance before installation.
- Porous surface requires crush and contamination protection: The porous surface must be protected from crushing and contamination during handling, and the cleaning method must be selected according to the process medium to preserve the pore structure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
