|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 100 × 100 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Operational constraints for this sheet arise from its porous metallic structure and service conditions. Compatibility review and structural safeguards are required to maintain filtration performance.
- Media compatibility review: Confirm media compatibility, operating pressure, temperature, and target flow before installation.
- Structural protection: Protect the porous surface from crushing and contamination during handling and storage.
- Cleaning method selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Assembly modification: Cutting, welding, and basic machining may be used for assembly integration while preserving the porous structure.
This procedure covers pre-installation parameter confirmation and porous-surface protection. Cleaning choices are matched to the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaner, Ultrasonic cleaner, Compatible chemical cleaning agents
- Confirm operating parameters
Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect the porous structure
Protect the porous sheet from crushing and contamination during handling and storage. - Select a cleaning method
Select a cleaning method from backflushing, steam, ultrasonic, or compatible chemical procedures based on the process medium and operating procedure.
How does the 20 PPI pore density relate to the 100 µm filtration rating in this sintered titanium foam sheet?
The 20 PPI value describes the cellular structure (approximately 1.27 mm cell spacing), while the 100 µm value specifies the filtration precision. The two parameters are independent but must be reviewed together when matching the sheet to an assembly, as the open-cell network with 35–45% porosity supports both particle retention and flow. The interconnected passages allow liquids and gases to pass while retaining particles larger than 100 µm.
What are the maximum operating temperature and media compatibility constraints for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. Media compatibility must be evaluated before installation; the titanium-based structure provides corrosion resistance in compatible media, but operating pressure, temperature, target flow, and dimensional tolerance should be reviewed for the specific process. The sheet is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and other applications where stated conditions are met.
What cleaning and handling procedures are recommended for maintaining the sintered porous titanium foam sheet?
The porous surface must be protected from crushing and contamination. Recommended cleaning methods include backflushing, steam cleaning, ultrasonic cleaning, or compatible chemical procedures, selected according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for integration into assemblies.
This sintered porous titanium foam sheet offers 100 µm filtration with 20 PPI structure and 35-45% interconnected porosity, suitable for solid-liquid and gas separation in moderate-temperature processes up to 300°C, but requires careful handling to avoid pore damage.
Positive
- Interconnected porous structure with low flow resistance: The 35-45% porosity and 20 PPI cellular framework provide interconnected pathways for liquids and gases, enabling efficient solid-liquid, gas-solid, and gas-liquid separation with minimal pressure drop in compatible media.
- Machinable and weldable titanium construction: The metallic porous sheet can be cut, welded, and machined for integration into custom assemblies, supporting laboratory prototyping and engineered filtration setups without requiring specialized joining methods.
Trade-offs
- Service temperature limited to 300°C: The recommended maximum operating temperature is 300°C, restricting use in high-temperature filtration, thermal management, or catalytic processes that exceed this threshold without material degradation.
- Porous surface susceptible to crushing and contamination: The open-cell foam structure is mechanically fragile under point loads and must be protected from physical impact and debris ingress; cleaning requires backflushing, steam, ultrasonic, or chemical methods matched to the process medium.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
