|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 200 × 200 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet requires protection from surface crushing and contamination to maintain its 10 µm filtration rating and 110 PPI cellular structure. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation to prevent structural degradation or performance loss.
- Surface Protection: Protect the porous surface from crushing and contamination during handling and storage.
- Service Temperature Limit: Recommended service temperature does not exceed 300°C to preserve the sintered titanium structure.
- Media Compatibility Requirement: Confirm media compatibility before installation to avoid corrosion or fouling of the porous titanium framework.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
Inspect the sheet for visible damage and confirm dimensional fit before assembly. Clean the sheet using a method compatible with the process medium to remove any handling residues.
Required Equipment: Clean lint-free gloves, Ultrasonic bath or backflushing apparatus
- Inspect the sheet
Inspect the 200 × 200 × 5 mm sheet for visible crushing, deformation, or contamination on the porous surfaces. - Confirm dimensional fit
Confirm that the sheet dimensions match the assembly envelope and that sealing surfaces are clean and undamaged. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—that is compatible with the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method to remove any handling residues or particulate contamination. - Dry the sheet
Allow the sheet to dry completely in a clean, particle-free environment before installation.
How does the 110 PPI pore density relate to the 10 µm filtration rating on this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular structure’s pore density, while the 10 µm value specifies the filtration precision. They are independent parameters; the 110 PPI structure has approximately 0.23 mm cell spacing and 35–45% porosity, which supports the 10 µm filtration rating. Both values must be reviewed together when matching the sheet to an assembly, as stated in the product’s configuration note.
What is the maximum service temperature for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C (approximately 572°F). Operating pressure, media compatibility, and other parameters are not specified in the product data and must be reviewed before quotation or installation.
What cleaning methods are recommended for this porous titanium sheet?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical cleaning procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination during handling and cleaning.
This 200 × 200 × 5 mm sintered porous titanium foam sheet combines a 10 µm filtration rating with a 110 PPI cellular structure, offering 35–45% porosity and an estimated bulk density of 2.48–2.93 g/cm³ for low-resistance, corrosion-tolerant separation in compatible media up to 300°C.
Positive
- Corrosion-resistant metallic porous structure: The titanium-based framework provides corrosion resistance and thermal stability in compatible media, supporting use in chemical, petrochemical, and seawater-treatment applications.
- Cleanable and reusable filtration media: The metallic construction permits backflushing, steam, ultrasonic, and compatible chemical cleaning, enabling reuse in repeated filtration cycles.
Trade-offs
- Temperature limit of 300°C: Recommended service temperature is ≤300°C, restricting use in higher-temperature processes without additional qualification.
- Surface vulnerable to crushing and contamination: The porous surface must be protected from mechanical damage and contamination during handling, requiring careful installation and cleaning procedures.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
