|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 200 × 200 × 3 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium surface must be protected from crushing and contamination during handling and storage. Recommended service temperature is ≤300°C, and media compatibility must be verified before installation.
- Mechanical Protection: Protect the porous surface from crushing and contamination to maintain filtration integrity.
- Thermal Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Media Compatibility: Confirm media compatibility, operating pressure, and temperature before installation to prevent corrosion or failure.
Inspect the sheet for damage before use and protect the porous surface from crushing. Select a cleaning method based on the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Perform cleaning
Perform the chosen cleaning procedure to remove trapped particulates and restore flow. - Verify cleanliness
Verify that the sheet is free of residual contaminants before reinstallation.
How does the 20 PPI cellular structure relate to the 10 µm filtration rating in this sintered titanium foam sheet?
PPI (pores per inch) describes the cellular density of the foam structure, while the µm value specifies the filtration precision. For this sheet, the 20 PPI structure yields approximately 1.27 mm cell spacing and 35–45% porosity, providing interconnected flow paths that support the 10 µm filtration rating. Both parameters must be reviewed together when matching the sheet to an assembly.
What is the maximum operating temperature for this sintered titanium foam sheet, and what media compatibility considerations apply?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but specific media compatibility, operating pressure, and target flow must be reviewed before installation. The sheet is suitable for water treatment, chemical processing, pharmaceutical filtration, gas purification, and other applications where the 200×200×3 mm envelope fits.
How should the sintered titanium foam sheet be cleaned and handled to maintain its filtration performance?
Protect the porous surface from crushing and contamination. Cleaning options include backflushing, steam, ultrasonic, or compatible chemical procedures, chosen according to the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care must be taken to avoid damaging the porous structure.
This 200 × 200 × 3 mm sintered titanium foam sheet delivers 10 µm filtration in a 20 PPI open-cell structure, with 35–45% porosity and an interconnected, machinable, cleanable metal framework; deployment is bounded by a 300°C service-temperature limit and the need to protect the porous surface from crushing and contamination.
Positive
- Interconnected 35–45% porous titanium network: The 10 µm filtration rating is paired with a 20 PPI cellular structure, ~1.27 mm cell spacing, and 35–45% porosity, providing interconnected flow paths for solid-liquid, gas-solid, and gas-liquid separation while retaining low flow resistance.
- Corrosion-resistant, cleanable, machinable construction: High-vacuum sintered titanium gives corrosion resistance and heat tolerance in compatible media, while the metallic structure can be cut, welded, or machined for integration and cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so hot-gas, steam, or high-temperature process applications must be reviewed against this ceiling before installation.
- Porous surface requires crush and contamination protection: Handling and cleaning must avoid crushing the porous surface and introducing contamination; the cleaning method should be matched to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
