|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 200 × 200 × 3 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium surface is susceptible to crushing and contamination, requiring protection during handling and storage. Recommended service temperature does not exceed 300°C, and media compatibility must be verified before installation.
- Surface Protection: Protect the porous surface from crushing and contamination to maintain filtration integrity.
- Temperature Limit: Do not exceed the recommended service temperature of 300°C to avoid structural degradation.
- Media Compatibility: Confirm media compatibility, operating pressure, and temperature before installation to prevent corrosion or failure.
This procedure outlines safe handling and cleaning steps for a sintered porous titanium foam sheet to preserve its filtration performance. Cleaning methods include backflushing, steam, ultrasonic, or compatible chemical procedures based on the process medium.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the porous titanium sheet for visible damage or contamination before handling. - Protect the surface
Protect the porous surface from crushing or contact with hard objects during transport and storage. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Perform cleaning
Perform the chosen cleaning procedure to remove trapped particulates without damaging the porous structure. - Verify cleanliness
Verify that the sheet is free of residual contaminants before reinstalling into the filtration assembly.
How does the 110 PPI cellular structure relate to the 10 µm filtration rating on this sintered titanium foam sheet?
The 110 PPI (pores per inch) describes the cellular density and spacing, approximately 0.23 mm for this sheet, while the 10 µm value specifies the filtration precision. These two parameters are independent but complementary: PPI governs the structural framework and flow distribution, while the micrometre rating determines the particle size retained. For this product, the 35–45% porosity and interconnected open-pore structure enable both fine filtration at 10 µm and bulk flow through the 110 PPI matrix.
What is the maximum operating temperature for this 200 × 200 × 3 mm sintered titanium foam sheet, and what limits it?
The recommended service temperature is ≤300°C. This limit is set by the thermal stability of the titanium/titanium-alloy porous structure, which retains its corrosion resistance and mechanical integrity only within this range. Exceeding 300°C can degrade the sintered interconnections and reduce the sheet's filtration performance and structural strength.
What cleaning methods are recommended to avoid damaging the porous structure of the 10 µm titanium foam sheet?
Recommended cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures. The porous surface must be protected from crushing and contamination during cleaning, so mechanical brushing or high-pressure impact should be avoided. Choose the method based on the process medium and operating procedure to preserve the 35–45% interconnected porosity and 10 µm filtration precision.
This 200 × 200 × 3 mm sintered titanium foam sheet with a 10 µm filtration rating and 110 PPI porous structure provides corrosion-resistant, cleanable filtration with interconnected 35–45% porosity, though its 300°C service ceiling and crush-sensitive porous surface require careful process-matching and handling.
Positive
- Corrosion-resistant titanium with 300°C service ceiling: The sintered titanium framework provides corrosion resistance and thermal stability for compatible media, with a recommended service temperature up to 300°C, enabling use in aggressive chemical and aqueous process streams.
- Interconnected 35–45% porosity with cleanable flow paths: A 35–45% open-pore structure with approximately 0.23 mm cell spacing maintains interconnected flow paths and low flow resistance, while the metallic construction supports backflushing, steam, ultrasonic, and compatible chemical cleaning for reuse.
Trade-offs
- Limited to ≤300°C service temperature: Recommended service temperature is capped at 300°C, so the sheet cannot be used in higher-temperature filtration or thermal-management processes without risking structural or performance degradation.
- Porous surface vulnerable to crushing and contamination: The open-pore surface must be protected from mechanical crushing and contamination; cleaning method—backflushing, steam, ultrasonic, or chemical—must be matched to the process medium to maintain pore integrity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
