|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet's porous structure is susceptible to crushing from mechanical impact or excessive clamping force during assembly. Media compatibility, operating pressure, and temperature must be verified before installation to prevent corrosion or structural degradation.
- Mechanical Protection Requirement: Protect the porous surface from crushing and contamination during handling and installation.
- Service Temperature Limit: Recommended service temperature does not exceed 300°C to maintain structural integrity.
- Cleaning Method Compatibility: Select backflushing, steam, ultrasonic, or chemical cleaning based on the process medium and operating procedure.
Confirm filtration rating, PPI, sheet dimensions, and media compatibility before installation. Protect the porous surface from crushing and contamination throughout the process.
Required Equipment: Soft-jaw clamps or padded fixture, Cutting or machining equipment (if resizing)
- Verify Specifications
Confirm the filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before proceeding. - Inspect the Sheet
Inspect the porous surface for any visible damage or contamination before handling. - Handle with Care
Handle the sheet using soft-jaw clamps or padded fixtures to avoid crushing the porous structure. - Integrate into Assembly
Position the sheet into the filtration assembly ensuring even compression without over-tightening. - Verify Seal Integrity
Verify that the sheet is seated correctly and the assembly seals are intact before pressurizing.
How does the 30 PPI pore density relate to the 10 µm filtration rating on this titanium foam sheet?
The 30 PPI (pores per inch) describes the cellular structure's pore density, while the 10 µm value specifies the filtration precision. The sheet has a general filtration range of 0.45–100 µm and a general pore-size range of 2.5–160 µm, so the 10 µm rating indicates the particle size it is designed to retain. The PPI and micron rating are independent parameters; both must be reviewed together when matching the sheet to an assembly, as the cellular structure affects flow resistance and mechanical properties while the filtration rating governs separation performance.
What are the maximum operating temperature and pressure limits for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. Operating pressure is not specified in the product description and must be reviewed based on the application, media compatibility, target flow, and dimensional tolerance. The sheet's titanium-based porous structure provides corrosion resistance and thermal stability, but specific pressure limits are not provided and require engineering evaluation before quotation or installation.
What cleaning methods are recommended for the porous titanium foam sheet to maintain its filtration performance?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination during handling. These cleaning options support reuse and help maintain the 10 µm filtration precision and 35–45% interconnected porosity.
This 160 × 160 × 5 mm sintered titanium foam sheet combines a 10 µm filtration rating with a 30 PPI open-cell structure and 35–45% porosity, providing corrosion-resistant, cleanable porous media for lab-scale filtration, separation, and flow-distribution studies.
Positive
- Interconnected 35–45% porosity network: The sintered titanium framework forms interconnected through-pores with approximately 0.85 mm cell spacing at 30 PPI, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Corrosion-resistant and cleanable metal media: Titanium-based construction provides corrosion resistance and heat tolerance to a recommended 300°C service temperature, and the metallic porous structure can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C; processes above this ceiling require a material-grade and compatibility review before installation.
- Porous surface vulnerable to damage: The porous surface must be protected from crushing and contamination; cleaning method must be selected by backflushing, steam, ultrasonic, or chemical procedures appropriate to the process medium.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
