|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The porous titanium structure is susceptible to crushing and contamination if the surface is not protected during handling and storage. Media compatibility, operating pressure, and temperature must be reviewed before installation to prevent corrosion or structural failure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to maintain structural integrity.
- Cleaning Constraint: Cleaning methods such as backflushing, steam, ultrasonic, or chemical procedures must be selected based on the process medium to avoid damaging the porous matrix.
- Mechanical Handling: Protect the porous surface from crushing forces and contamination during handling and assembly.
Inspect the sheet for visible damage or contamination before installation. Confirm dimensional fit and media compatibility with the target assembly.
Required Equipment: Clean lint-free gloves, Flat inspection surface
- Inspect the sheet
Inspect the sheet visually for any crushing, deformation, or surface contamination before handling. - Verify dimensions
Verify that the sheet dimensions match the assembly envelope using calibrated measuring tools. - Confirm media compatibility
Confirm that the process fluid or gas is compatible with titanium at the intended operating temperature and pressure. - Install the sheet
Install the sheet into the filtration assembly, ensuring even support to avoid localized stress on the porous structure.
What is the relationship between the 110 PPI pore density and the 10 µm filtration rating on this sintered titanium foam sheet?
PPI and filtration rating are independent parameters: PPI defines the cellular structure (cell spacing approximately 0.23 mm at 110 PPI), while the micrometre value specifies the filtration precision. The 10 µm rating is achieved through the interconnected pore-size distribution within the 35–45% porosity range, not solely by the PPI. Both values must be reviewed together when matching the sheet to an assembly.
What integration considerations are important when cutting, welding, or machining this sintered titanium foam sheet for use in an assembly?
The metallic titanium construction supports cutting, welding, and basic machining. However, the porous surface must be protected from crushing and contamination during these processes, as the 110 PPI cell structure and 35–45% porosity are delicate. Proper support and avoidance of mechanical deformation are essential to preserve the open-pore flow paths and filtration performance.
What cleaning protocols are recommended for this 10 µm titanium foam filter to avoid damaging the porous structure?
Approved cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures. Mechanical scrubbing should be avoided as it can crush the 110 PPI cell structure and reduce the 35–45% porosity. The choice of method depends on the process medium and operating procedure, but the porous surface must always be protected from contamination and deformation.
This 10 µm, 110 PPI sintered titanium foam sheet in a 160 × 160 × 5 mm format provides an interconnected 35–45% porous network with approximately 0.23 mm cell spacing, combining filtration precision with flow suitability for laboratory and engineered separation trials. Deployment requires confirming media compatibility and respecting the recommended 300°C service limit.
Positive
- Interconnected 35–45% porous titanium network: The sintered titanium sheet offers a 10 µm filtration rating and 110 PPI structure with approximately 0.23 mm cell spacing, providing through-pore pathways for solid-liquid, gas-solid and gas-liquid separation while preserving low flow resistance.
- Corrosion-resistant, cleanable metallic media: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, with cleaning options including backflushing, steam, ultrasonic and compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C despite titanium's heat tolerance, so higher-temperature process streams require explicit engineering review before installation.
- Media compatibility and handling verification required: Buyers must confirm filtration rating, PPI, dimensions, material grade, target flow, operating pressure, temperature and media compatibility before installation; the porous surface must also be protected from crushing and contamination.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
