|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 20 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before installation. The porous surface must be protected from crushing and contamination, and service temperature is limited to ≤300°C.
- Media Compatibility Review: Confirm that the process medium is compatible with sintered titanium and titanium alloy before installation.
- Service Temperature Limit: Do not operate the sheet above the recommended service temperature of ≤300°C.
- Crush and Contamination Protection: Protect the porous surface from crushing and contamination during handling, storage, and assembly.
- Cleaning Procedure Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Machining Integration Constraint: Allow cutting, welding, or basic machining only for assembly integration while preserving the porous structure.
Prepare and clean the sintered titanium sheet without damaging its porous structure. Use process-appropriate methods to remove retained solids and avoid contamination before installation or reuse.
Required Equipment: Backflushing system, Steam cleaner, Ultrasonic bath, Chemical cleaning bath
- Verify Service Conditions
Confirm the sheet's rated filtration, cellular configuration, dimensions, material grade, and operating limits against the intended assembly before installation. - Protect Porous Surface
Inspect the sheet and protect the porous surface from crushing and contamination during handling and storage. - Clean Before Use
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical methods appropriate for the process medium. - Integrate into Assembly
Cut, weld, or machine the sheet only as needed for assembly integration while preserving the porous flow paths. - Verify Flow Path After Cleaning
Verify that the interconnected porous flow paths remain open after cleaning and assembly.
How does the 10 µm filtration rating relate to the 40 PPI pore density in this sintered titanium foam sheet?
The 10 µm filtration rating specifies the particle retention size, while the 40 PPI (pores per inch) indicates the cell density of the porous structure. These two parameters are independent but complementary: the micrometre value defines filtration precision, and PPI describes the cellular geometry. Together, they determine the sheet's separation characteristics, flow resistance, and mechanical integrity, as stated in the product's configuration note.
What are the recommended operating temperature and media compatibility constraints for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation, as the sheet is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and other applications only when the process medium is compatible with the titanium or titanium-alloy material.
What cleaning and handling procedures are recommended to maintain the performance of this porous titanium foam sheet?
The porous surface must be protected from crushing and contamination. Acceptable cleaning methods include backflushing, steam, ultrasonic, and chemical cleaning, chosen according to the process medium and operating procedure. These practices are specified in the product's handling and cleaning notes to preserve the interconnected pore structure and filtration performance.
This 160 × 160 × 20 mm sintered titanium foam sheet combines a 10 µm filtration rating with a 40 PPI interconnected porous network at 35–45% porosity, supporting solid-liquid, gas-solid, and gas-liquid separation with relatively low flow resistance. Its corrosion-resistant, cleanable titanium structure suits laboratory filtration and engineered assemblies, but the 300 °C service ceiling and the need to protect the porous surface from crushing and contamination must be factored into installation planning.
Positive
- Interconnected porous filtration structure: The 35–45% porosity with approximately 0.64 mm cell spacing and 10 µm filtration rating provides interconnected pathways for solid-liquid, gas-solid, and gas-liquid separation while supporting relatively low flow resistance.
- Corrosion-resistant and cleanable titanium media: The sintered titanium structure offers corrosion resistance and thermal stability in compatible media, with cleaning options including backflushing, steam, ultrasonic, and compatible chemical procedures for reuse.
Trade-offs
- Recommended service temperature limited to 300 °C: The stated recommended service temperature is ≤300 °C, so higher-temperature process streams are not covered by the product specification and require explicit compatibility review before use.
- Porous surface requires crush and contamination protection: The handling guidance states that the porous surface must be protected from crushing and contamination, and the cleaning method must be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
