Sintered Titanium Foam Sheet 10μm 20 PPI 15mm ATOMFAIR®

$180.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered titanium foam sheet with 10 μm filtration, 20 PPI, 160 × 160 × 15 mm size, 35–45% porosity and ≤300°C rating. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 15 mm, 20 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 10 µm filtration rating with a 20 PPI cellular structure in a 160 × 160 × 15 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 1.27 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 160 × 160 × 15 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T20-D1510
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	10 µm
Sheet Size	160 × 160 × 15 mm
Thickness	15 mm
Pore Density	20 PPI
Approximate Cell Spacing	1.27 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	5 × 10^-5 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

10 µm filtration precision paired with a 20 PPI porous-cell structure.
160 × 160 × 15 mm sheet supplied as one piece.
Cell spacing is approximately 1.27 mm for the 20 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 10 µm, 20 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 160 × 160 × 15 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

How does the 10 µm filtration rating relate to the 20 PPI pore density in this sintered titanium foam sheet?

The 10 µm filtration rating specifies the particle size cutoff, while the 20 PPI (pores per inch) describes the cellular structure's pore density. These are independent parameters: the filtration rating determines the smallest particle retained, and the PPI affects flow resistance and mechanical support. The product description emphasizes reviewing both values together when matching the sheet to an assembly.

What are the maximum operating temperature and pressure limits for this porous titanium sheet?

The recommended service temperature is ≤300°C, as stated in the technical specifications. The product description does not specify a maximum operating pressure; it advises that media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before quotation or installation. Pressure limits depend on the specific assembly and application conditions.

What cleaning methods are recommended for this sintered titanium foam sheet to maintain its filtration performance?

The product description lists backflushing, steam, ultrasonic, and compatible chemical cleaning as suitable methods. It also warns to protect the porous surface from crushing and contamination. The choice of cleaning procedure should be based on the process medium and operating procedure to preserve the sheet's interconnected porous structure and filtration rating.

Assessment

This 10 µm, 20 PPI sintered titanium foam sheet (160 × 160 × 15 mm) offers a corrosion-resistant, cleanable porous metal structure with 35–45% porosity and interconnected flow paths, suitable for solid-liquid and gas separation in laboratory and engineered filtration assemblies, though its 300°C service temperature limit and sensitivity to surface crushing require careful handling and media compatibility review.

Positive

Corrosion-resistant titanium construction: The sintered titanium or titanium-alloy matrix provides corrosion resistance and thermal stability up to 300°C in compatible media, enabling use in chemical, pharmaceutical, and water-treatment filtration without rapid degradation.
Cleanable and reusable porous structure: The 35–45% interconnected porosity supports backflushing, steam, ultrasonic, or chemical cleaning, allowing repeated use and reduced consumable waste in laboratory and process filtration applications.

Trade-offs

Limited service temperature of 300°C: The recommended maximum service temperature is 300°C, which restricts deployment in high-temperature gas filtration or thermal processes exceeding this threshold without material degradation.
Surface vulnerable to crushing and contamination: The porous surface must be protected from mechanical crushing and particulate contamination during handling and installation, as damage can compromise filtration precision and flow uniformity.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).