|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 10 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Cleaning methods include backflushing, steam, ultrasonic, or compatible chemical procedures depending on the process medium.
- Service Temperature Limit: Recommended service temperature does not exceed 300°C to avoid structural degradation.
- Media Compatibility Requirement: Media compatibility, operating pressure, and temperature must be reviewed before installation to prevent corrosion or failure.
- Porous Surface Protection: The porous surface must be protected from crushing and contamination during handling and storage.
Inspect the sheet for damage before installation and protect the porous surface from crushing. Select a cleaning method based on the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage, deformation, or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed by excessive clamping force. - Select a cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method, following manufacturer guidelines for duration and intensity. - Rinse and dry the sheet
Rinse the sheet with compatible solvent or deionized water and dry it in a clean environment before reuse.
How does the 10 µm filtration rating relate to the 30 PPI pore density in this sintered titanium foam sheet?
The 10 µm filtration rating specifies the particle size the sheet is designed to retain, while the 30 PPI (pores per inch) describes the cellular structure's pore density. The sheet has 35–45% porosity with approximately 0.85 mm cell spacing and interconnected open-pore paths. The filtration precision and PPI are independent parameters; both must be reviewed together when matching the sheet to an assembly, as stated in the configuration note.
What are the maximum operating temperature and media compatibility considerations for this 10 µm titanium foam sheet?
The recommended service temperature is ≤300°C. The titanium-based porous structure provides corrosion resistance in compatible media, but specific media compatibility, operating pressure, temperature, and target flow must be reviewed before installation. The sheet is suited for applications such as pharmaceutical and chemical filtration, water treatment, gas purification, and catalyst recovery, but media compatibility should be confirmed for each process.
Can this sintered titanium foam sheet be machined or welded into custom assemblies?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. The sheet is supplied as a 160 × 160 × 10 mm piece, but custom dimensions are available upon consultation. Appropriate handling is required to protect the porous surface from crushing and contamination during machining.
This sintered porous titanium foam sheet offers a 10 µm filtration rating within a 30 PPI cellular structure, providing interconnected porosity (35–45%) for low-resistance liquid and gas separation. The titanium construction ensures corrosion resistance and thermal stability up to 300°C, but requires careful handling to avoid surface damage and verification of media compatibility before use.
Positive
- 10 µm precision with 30 PPI structure: Combines a 10 µm filtration rating with a 30 PPI porous-cell network (0.85 mm cell spacing, 35–45% porosity) to deliver stable, low-resistance flow for solid-liquid, gas-solid, and gas-liquid separations.
- Corrosion-resistant and reusable titanium: Titanium-based construction provides corrosion resistance, thermal stability up to 300°C, and compatibility with backflushing, steam, ultrasonic, or chemical cleaning for repeated use in compatible media.
Trade-offs
- Porous surface requires careful handling: The open-pore structure is susceptible to crushing and contamination; protection during handling and cleaning is essential to maintain filtration performance.
- Pre-installation verification needed: Media compatibility, operating pressure, temperature, flow rate, and dimensional tolerance must be confirmed before installation—this is not a plug-and-play component.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
