|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 160 × 160 × 10 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Cleaning methods such as backflushing, steam, ultrasonic, or chemical procedures must be selected based on the process medium and operating procedure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to avoid structural degradation.
- Media Compatibility: Media compatibility, operating pressure, and temperature must be reviewed before installation to prevent corrosion or failure.
- Machining Constraint: The metallic construction supports cutting, welding, and basic machining for assembly integration, but the porous surface must remain protected from crushing.
Protect the porous surface from crushing and contamination during handling and installation. Select a cleaning method appropriate for the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method to remove accumulated particulates without damaging the porous structure. - Verify cleanliness
Verify that the sheet is free of residual contaminants before returning it to service.
What is the relationship between the filtration rating (10 µm) and the pore density (20 PPI) on this sintered titanium foam sheet?
The 10 µm filtration rating refers to the particle size the sheet can capture, while the 20 PPI (pores per inch) describes the cellular structure's cell density. The sheet has a 35–45% porosity with interconnected paths, and its relative air permeability is 5×10⁻⁵ L/(cm²·min·Pa). The two parameters are independent but must be matched together: PPI affects flow resistance and structural strength, while the filtration rating determines separation efficiency. The manufacturer explicitly advises reviewing both values together when matching the sheet to an assembly.
What are the recommended service temperature and media compatibility considerations for this sintered porous titanium foam sheet?
The recommended service temperature is ≤300°C as stated in the technical specifications. The sheet is made from titanium and titanium alloy, providing corrosion resistance, but media compatibility must be verified for specific chemicals, pressures, and flow conditions. The product description explicitly notes that media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before quotation or installation.
What cleaning methods are recommended for this sintered porous titanium foam sheet to avoid damaging the porous structure?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures. The manufacturer emphasizes protecting the porous surface from crushing and contamination, and selecting the cleaning method based on the process medium and operating procedure. This preserves the 35–45% porosity and interconnected flow paths essential for filtration performance.
This 10 µm, 20 PPI sintered titanium foam sheet (160 × 160 × 10 mm) offers a 35–45% interconnected porous network with a bulk density of 2.48–2.93 g/cm³, balancing filtration precision with structural integrity for lab-scale solid-liquid, gas-solid, and gas-liquid separation trials.
Positive
- Interconnected porous structure: The 35–45% porosity with interconnected through-pores provides low flow resistance and stable separation for liquids and gases, supporting filtration ratings down to 10 µm.
- Corrosion and thermal resistance: Titanium-based construction offers corrosion resistance and heat tolerance up to 300°C, enabling use in aggressive chemical, petrochemical, and high-temperature process streams.
Trade-offs
- Surface vulnerability to damage: The porous surface must be protected from crushing and contamination during handling, as mechanical impact can compromise pore integrity and filtration performance.
- Temperature and media compatibility limits: Recommended service temperature is limited to 300°C, and media compatibility must be verified for each process, as aggressive chemicals or high pressures may exceed the material's operational envelope.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
