|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 120 × 120 × 20 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines compatibility, mechanical, and cleaning constraints for the sintered porous titanium sheet. These limits protect the porous structure from damage and incompatible operating conditions.
- Media Compatibility Review: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation or quotation.
- Filtration Specification Matching: Review pore density and filtration rating together when matching the sheet to an assembly.
- Temperature Limit: Operate only within the recommended maximum service temperature.
- Handling Protection: Protect the porous surface from crushing and contamination during storage, handling, and installation.
- Cleaning Selection: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
This procedure outlines the required inspection, handling, and cleaning actions for the sintered porous titanium sheet. These steps minimize contamination, mechanical damage, and media incompatibility during service.
Required Equipment: backflushing equipment, steam cleaning equipment, ultrasonic bath, chemical cleaning bath
- Confirm Service Parameters
Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation or quotation. - Match Filtration Attributes
Review pore density and filtration rating together when matching the sheet to an assembly. - Protect the Porous Surface
Protect the porous surface from crushing and contamination during handling and installation. - Select a Cleaning Method
Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure. - Clean the Sheet
Clean the sheet using the selected method when process-medium residue or fouling is present.
How does the 10 µm filtration rating relate to the 40 PPI pore density in this sintered titanium foam sheet?
The 10 µm filtration rating and 40 PPI (pores per inch) describe different aspects of the sheet. The micrometre value indicates the filtration precision (particle retention size), while PPI describes the cellular structure's pore density. Both must be reviewed together when matching the sheet to an assembly, as stated in the product configuration note.
What are the temperature and pressure limitations for using this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The source does not specify a maximum operating pressure; instead, it advises that media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before quotation or installation. The sheet's 35–45% porosity and titanium material provide corrosion resistance and thermal stability within compatible process conditions.
What cleaning methods are recommended for this porous titanium sheet to maintain its filtration performance?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. Care must be taken to protect the porous surface from crushing and contamination during handling and cleaning.
This 120 × 120 × 20 mm sintered porous titanium foam sheet combines a 10 µm filtration rating with a 40 PPI cellular structure, 35–45% porosity, and approximately 0.64 mm cell spacing, supporting liquid/gas separation and porous-electrode research. Evaluation confirms the 300°C service ceiling and handling sensitivity require application-specific validation of media compatibility, operating pressure, and cleaning protocol.
Positive
- Interconnected porous titanium network: The 35–45% porosity with approximately 0.64 mm cell spacing and uniform pore distribution creates interconnected flow paths, enabling solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Corrosion-resistant and cleanable metallic media: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, while the metallic construction permits cutting, welding, and basic machining for assembly integration and cleaning via backflushing, steam, ultrasonic, or compatible chemical procedures.
Trade-offs
- Service temperature limited to 300°C: The recommended service temperature is ≤300°C, so higher-temperature processes require explicit engineering review and verification of material compatibility before deployment.
- Porous surface requires careful handling: The porous surface must be protected from crushing and contamination, and the cleaning method must be selected according to the process medium and operating procedure to avoid damaging the pore structure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
