|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 120 × 120 × 10 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Cleaning methods such as backflushing, steam, ultrasonic, or chemical procedures must be selected based on the process medium and operating procedure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to avoid structural degradation.
- Media Compatibility: Media compatibility, operating pressure, and temperature must be reviewed before installation to prevent corrosion or failure.
- Machining Constraint: Cutting, welding, and basic machining are supported but must be performed carefully to avoid damaging the porous network.
Protect the porous surface from crushing and contamination during handling and storage. Select a cleaning method appropriate for the process medium to maintain filtration performance.
Required Equipment: Backflushing system, Ultrasonic cleaner, Steam cleaning equipment
- Inspect the sheet
Inspect the sheet for visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly ensuring a secure seal without crushing the porous edges. - Monitor operating conditions
Monitor operating pressure and temperature to stay within the recommended service limit of 300°C. - Select cleaning method
Select a cleaning method such as backflushing, steam, ultrasonic, or chemical cleaning based on the process medium. - Clean the sheet
Clean the sheet using the chosen method to remove trapped particulates without damaging the porous structure. - Rinse and dry
Rinse the sheet with compatible solvent or deionized water and dry thoroughly before reuse.
What is the relationship between PPI and filtration rating for this sintered titanium foam sheet?
PPI (pores per inch) describes the cellular structure's pore density, while the micrometre value (10 µm) describes the filtration precision. According to the product configuration note, both values must be reviewed together when matching the sheet to an assembly, as they independently influence flow characteristics and particle retention. The sheet's 30 PPI structure yields approximately 0.85 mm cell spacing and 35–45% porosity, while the 10 µm rating defines the nominal particle cutoff.
Can this titanium foam sheet be welded or machined for integration into existing assemblies?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration, as stated in the product description. The sheet is made from titanium or titanium-alloy powder through high-vacuum sintering, providing a solid metal framework that can be processed with standard fabrication techniques. However, care must be taken to protect the porous surface from crushing and contamination during handling.
What are the recommended service temperature and cleaning methods for this porous titanium sheet?
The recommended service temperature is ≤300°C. Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, as stated in the handling section. The choice of cleaning method should be based on the process medium and operating procedure to maintain the porous structure's integrity.
This 10 µm, 30 PPI sintered porous titanium sheet in a 120 × 120 × 10 mm format provides an interconnected 35–45% porosity structure suited to laboratory filtration and separation trials. Its titanium framework offers corrosion resistance and a ≤300°C service limit, but media compatibility and operating pressure/temperature must be verified before installation.
Positive
- Interconnected porous network for low-resistance flow: The 35–45% interconnected porosity with approximately 0.85 mm cell spacing supports solid-liquid, gas-solid and gas-liquid separation while preserving open flow paths. This structure delivers low flow resistance for a 10 µm filtration sheet.
- Corrosion-resistant titanium with cleaning options: The titanium-based porous structure provides corrosion resistance and thermal stability in compatible media. The metallic sheet can be cleaned by backflushing, steam, ultrasonic or compatible chemical procedures, supporting reuse in suitable process conditions.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require explicit evaluation. Operating pressure, temperature and media compatibility should be reviewed before installation.
- Porous surface sensitive to crushing and contamination: The porous titanium surface must be protected from crushing and contamination during handling. The cleaning method—backflush, steam, ultrasonic or chemical—should be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
