|
Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 120 × 120 × 10 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Recommended service temperature is ≤300°C. Protect the porous surface from crushing and contamination during handling and cleaning.
- Media Compatibility: Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation.
- Cleaning Constraints: Choose backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
Protect the porous surface from crushing and contamination during handling. Select an appropriate cleaning method based on the process medium and operating procedure.
Required Equipment: Backflushing system, Steam cleaning equipment, Ultrasonic bath
- Inspect the sheet
Inspect the sheet for any visible damage or contamination before installation. - Install the sheet
Install the sheet into the filtration assembly, ensuring the porous surface is not crushed or deformed. - Select cleaning method
Select a cleaning method—backflushing, steam, ultrasonic, or chemical—based on the process medium and operating procedure. - Clean the sheet
Clean the sheet using the selected method to remove accumulated particulates without damaging the porous structure. - Rinse and dry
Rinse the sheet with compatible solvent if needed and allow it to dry completely before reuse.
How do the 10 µm filtration rating and 20 PPI pore density differ on this sintered titanium foam sheet?
PPI describes the cellular structure, while the micrometre value describes filtration precision, and both should be reviewed together when matching the sheet to an assembly. This sheet has a 10 µm filtration rating with a 20 PPI structure, approximately 1.27 mm cell spacing, 35–45% porosity, and interconnected through-pore flow paths, with a listed relative air permeability of 5 × 10^-5 L/(cm²·min·Pa).
What compatibility or operating constraints must be reviewed before using this porous titanium sheet?
Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before quotation or installation. The recommended service temperature is ≤300°C, and the titanium-based porous structure provides corrosion resistance and thermal stability in compatible media, supporting solid-liquid, gas-solid, and gas-liquid separation.
How should this sintered titanium sheet be handled, cleaned, or integrated?
Protect the porous surface from crushing and contamination during handling. The metallic construction supports cutting, welding, and basic machining for assembly integration, and cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures selected according to the process medium and operating procedure.
This 10 µm, 20 PPI sintered titanium foam sheet provides a 120 × 120 × 10 mm porous metallic element with 35–45% interconnected porosity and low flow resistance, combining titanium-based corrosion resistance and cleanability with a 300°C service limit for filtration and separation trials.
Positive
- Interconnected Porous Structure Balances Filtration and Flow: The 35–45% interconnected porosity with approximately 1.27 mm cell spacing preserves open through-paths for liquids and gases while maintaining a 10 µm filtration rating, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Heat-Tolerant Corrosion-Resistant Cleanable Titanium Matrix: The sintered titanium framework provides corrosion resistance and thermal stability in compatible media, and the metallic porous structure can be cleaned by backflushing, steam, ultrasonic, or compatible chemical procedures for reuse.
Trade-offs
- Service Temperature Limited to 300°C: Recommended service temperature is ≤300°C, so this porous titanium sheet should not be deployed in higher-temperature process streams without compatibility review.
- Porous Surface Requires Protective Handling and Compatibility Review: The porous surface must be protected from crushing and contamination, and media compatibility, operating pressure, temperature, target flow, and dimensional tolerance should be confirmed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
