Sintered Porous Titanium Foam Sheet 10μm 20 PPI ATOMFAIR®

$85.00

Institutional Procurement & Supply Compliance: As a verified US supplier, Atomfair accepts formal institutional Purchase Orders (POs), contract billing schedules, and custom procurement loops for university and national laboratories, and corporate R&D departments globally.

Research-grade sintered titanium foam sheet with 10μm filtration, 20 PPI pores, 100 × 100 × 1 mm size, 35–45% porosity and ≤300°C service. Order now.

Sintered Titanium and Porous Titanium Foam Sheet, 10 µm Filtration Rating, 100 × 100 × 1 mm, 20 PPI, 1 Piece

Research-grade laboratory product

Product Overview

This sintered porous titanium foam sheet combines a 10 µm filtration rating with a 20 PPI cellular structure in a 100 × 100 × 1 mm format. Its interconnected titanium framework supports solid-liquid, gas-solid and gas-liquid separation while preserving open pathways for flow.

Made from titanium or titanium-alloy powder through forming and high-vacuum sintering, the sheet contains interconnected passages with 35–45% porosity and about 1.27 mm cell spacing. Its estimated bulk density is 2.48–2.93 g/cm³. The metallic porous structure offers low flow resistance, corrosion resistance, heat tolerance, cleanability and reuse in compatible process conditions.

Supplied as one 100 × 100 × 1 mm sheet, this product fits laboratory trials and engineered filtration assemblies used in water treatment, chemical and petrochemical processing, pharmaceutical and food clarification, gas purification, catalyst recovery, oil filtration, seawater-treatment pretreatment, porous-electrode development, flow distribution, acoustic damping and thermal-management studies. Media compatibility, operating pressure, temperature, target flow and dimensional tolerance should be reviewed before quotation or installation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-T20-A0110
Material	Titanium and titanium alloy
Product Form	Sintered porous titanium / porous titanium foam sheet
Manufacturing Process	Powder forming and high-vacuum sintering
Filtration Rating	10 µm
Sheet Size	100 × 100 × 1 mm
Thickness	1 mm
Pore Density	20 PPI
Approximate Cell Spacing	1.27 mm
Porosity	35–45%
Open-Pore / Through-Pore Structure	Interconnected porous flow paths
Bulk Density Estimate	2.48–2.93 g/cm³ (derived from 35–45% porosity and 4.51 g/cm³ dense titanium)
Relative Air Permeability	5 × 10^-5 L/(cm²·min·Pa)
General Filtration Range	0.45–100 µm
General Pore-Size Range	2.5–160 µm
Air Permeability Range	1.5–800 m³/(h·m²·kPa)
Recommended Service Temperature	≤300°C
Package Quantity	1 piece

Performance Features

10 µm filtration precision paired with a 20 PPI porous-cell structure.
100 × 100 × 1 mm sheet supplied as one piece.
Cell spacing is approximately 1.27 mm for the 20 PPI structure.
A 35–45% porosity range leaves interconnected paths for liquids and gases.
Uniform pore distribution supports stable separation and controlled filtration.
Titanium-based porous structure provides corrosion resistance and thermal stability in compatible media.
Metallic construction can support cutting, welding and basic machining for assembly integration.
Cleaning options include backflushing, steam, ultrasonic and compatible chemical procedures.

Application Scope

This 10 µm, 20 PPI titanium sheet can be evaluated in porous-metal filtration and separation workflows that fit a 100 × 100 × 1 mm envelope. Relevant fields include pharmaceutical and chemical process filtration, water-treatment prefiltration, food and beverage clarification, oil and solvent filtration, gas and steam purification, catalyst recovery, desalination pretreatment, porous electrodes, flow distribution, acoustic control, thermal transfer and laboratory materials research.

PROCUREMENT CHECK: Confirm filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature and media compatibility before quotation.

CONFIGURATION NOTE: PPI describes the cellular structure, while the micrometre value describes filtration precision. Review both values together when matching the sheet to an assembly.

HANDLING & CLEANING: Protect the porous surface from crushing and contamination. Choose backflushing, steam, ultrasonic or chemical cleaning according to the process medium and operating procedure.

RFQ NOTE: Custom dimensions are available upon consultation. Include the required length, width, thickness, PPI, filtration rating and quantity when requesting dimensional review.

LABORATORY PROCUREMENT SUPPORT

For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

This 10 µm filtration rating, 20 PPI sintered titanium sheet requires adherence to temperature limits and handling precautions to maintain structural integrity. Media compatibility and dimensional fit must be confirmed before installation.

Temperature Limit: Recommended service temperature does not exceed 300°C.
Handling Precautions: Protect the porous surface from crushing and contamination during handling and storage.
Machining Compatibility: Cutting, welding, and basic machining are supported but may alter the porous structure.
Cleaning Procedures: Select backflushing, steam, ultrasonic, or chemical cleaning according to the process medium and operating procedure.
Media Compatibility Review: Confirm media compatibility, operating pressure, temperature, and target flow before installation.

FAQ

How does the 20 PPI pore density relate to the 10 µm filtration rating on this sintered titanium foam sheet?

The 20 PPI (pores per inch) describes the cellular structure, with an approximate cell spacing of 1.27 mm, while the 10 µm filtration rating indicates the particle size retention. The 35–45% porosity and interconnected through-pore structure provide low flow resistance while maintaining the specified filtration precision. Both parameters must be reviewed together when matching the sheet to an assembly.

What is the maximum service temperature for this sintered titanium sheet, and what are the key compatibility considerations?

The recommended service temperature is ≤300°C. The titanium-based porous structure offers corrosion resistance and thermal stability, but media compatibility, operating pressure, and target flow must be reviewed before installation. The sheet is suitable for water treatment, chemical processing, pharmaceutical, food, gas purification, and other applications within the specified envelope.

What cleaning and handling procedures are recommended for this porous titanium foam sheet to maintain its filtration performance?

The porous surface must be protected from crushing and contamination. Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure. The metallic construction supports cutting, welding, and basic machining for assembly integration.

Assessment

This 100 × 100 × 1 mm sintered porous titanium foam sheet combines a 10 µm filtration rating with a 20 PPI cellular structure and 35–45% interconnected porosity, enabling low-resistance solid-liquid, gas-solid, and gas-liquid separation. It is suited to laboratory filtration and engineered assemblies where the ≤300°C service ceiling, media compatibility, and porous-surface handling precautions are respected.

Positive

Interconnected 35–45% porosity with 10 µm rating: The 20 PPI sintered titanium structure provides interconnected through-pore flow paths at 35–45% porosity, supporting solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
Corrosion-resistant, heat-tolerant, cleanable metal structure: The titanium-based porous construction tolerates compatible process media, supports cutting, welding, and basic machining for assembly integration, and can be cleaned by backflushing, steam, ultrasonic, or chemical methods for reuse.

Trade-offs

Maximum service temperature limited to 300°C: Although the material is described as heat tolerant, the recommended service temperature is ≤300°C, so higher-temperature process streams require verification before use.
Porous surface vulnerable to crushing and contamination: Handling must protect the porous surface from crushing and contamination, and the cleaning method—backflushing, steam, ultrasonic, or chemical—must be matched to the process medium and operating procedure.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).