|
Programmable LED Light Incubator, 450 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This incubator requires a stable AC 220 V 50 Hz power supply rated at 2000 W and an ambient working environment of +5 to 30 C. Installation must allow access to air inlets, exhaust paths, shelves, ports, doors and control interfaces for cleaning and maintenance.
- Installation Space: Confirm the installation space accommodates the external dimensions of 950 x 850 x 1850 mm before positioning the chamber.
- Power Supply: Prepare a dedicated AC 220 V 50 Hz power supply capable of supporting the 2000 W input requirement.
- Transport Orientation: Keep the packed chamber upright and use suitable lifting equipment to reduce movement and impact during transport.
- Accessibility: Maintain accessible air inlets, exhaust paths, shelves, ports, doors and control interfaces for routine cleaning and maintenance.
- Configuration Selection: Select the required controller, lighting, humidity, communication and optional accessory configuration before ordering.
Position the incubator in a prepared installation space with adequate clearance and connect it to the specified power supply. Configure the programmable controller before loading samples and verify normal operation through the display and alarm functions.
Required Equipment: Suitable lifting equipment
- Confirm Installation Space
Confirm the installation space accommodates the external dimensions of 950 x 850 x 1850 mm and an ambient working environment of +5 to 30 C. - Prepare Power Supply
Prepare a dedicated AC 220 V 50 Hz power supply rated for the 2000 W input requirement. - Move Chamber Into Position
Move the packed chamber upright using suitable lifting equipment to reduce movement and impact during transport. - Position for Access
Position the chamber so air inlets, exhaust paths, shelves, ports, doors and control interfaces remain accessible for cleaning and maintenance. - Set Program Segments
Set the programmable controller's multi-segment temperature, humidity, light intensity and time parameters before loading samples. - Load Samples
Load samples onto the three shelves after confirming the desired program segments are active. - Start and Monitor Operation
Start the chamber and monitor the display and wireless alarm functions for abnormal conditions during operation.
How does the temperature control range differ between lighted and unlighted operation, and what impact does that have on plant growth protocols?
With lighting active the temperature range is 10 to 50°C, while without lighting it extends to 0 to 50°C. This means photoperiod protocols requiring lower temperatures must account for the restricted range when lights are on; the chamber cannot maintain sub-10°C conditions during illuminated periods. The temperature fluctuation and uniformity is ±1°C across both modes.
Can the incubator be equipped with CO2 monitoring for plant tissue culture applications?
Yes, an optional atmosphere-control package adds an infrared CO2 sensor and controller, along with a separate CO2 inlet. This configuration supports specialized plant growth workflows such as tissue culture where precise CO2 levels are required. The standard unit ships without CO2 control, so the option must be selected before ordering.
What are the electrical and spatial installation requirements for the 450 L model?
The chamber requires a 2000 W, AC 220 V, 50 Hz power supply and operates in a +5 to 30°C ambient environment. External dimensions are 950 x 850 x 1850 mm, so ensure adequate floor space and clearance for air inlets, exhaust paths, and door swing. The unit uses two alternating imported compressors for continuous long-duration operation; plan for stable power to avoid compressor cycling issues.
This 450 L programmable LED light incubator uses dual alternating compressors for continuous long-duration operation and a multi-segment controller for precise temperature, humidity, light, and time programming, but lacks active humidity control and requires a controlled ambient environment of +5 to 30°C.
Positive
- Dual alternating compressors for continuous operation: The chamber uses two imported compressors that automatically alternate, supporting dependable low-temperature performance and long-duration running stability.
- Multi-segment programmable controller: The programmable controller enables independent setting of temperature, humidity, light intensity, and time in up to 30 segments, improving environmental tracking for incubation and cultivation workflows.
Trade-offs
- No active humidity control: This configuration does not include active humidity control; humidity deviation is stated as ±5–7%RH, which may not meet requirements for humidity-sensitive applications.
- Limited ambient operating range: The chamber requires a working environment of +5 to 30°C; operation outside this range may affect performance or require additional climate control in the lab.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
