|
150L Intelligent Mold Incubator, -5-70℃ Temperature Control Range
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, specification comparison, accessory review, or quotation support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
The incubator must be operated within an ambient temperature range of 5-35°C and connected to a grounded AC220V 50Hz power supply. The stainless steel chamber requires regular cleaning with non-abrasive agents to maintain hygiene and prevent corrosion.
- Ambient Temperature Range: The ambient temperature must be maintained between 5°C and 35°C to ensure proper temperature control and prevent compressor strain.
- Power Supply Requirements: The incubator requires a grounded AC220V 50Hz power supply with a minimum capacity of 850W and appropriate circuit protection.
- Chamber Maintenance: Clean the mirror stainless steel inner chamber with soft, non-abrasive cloths and mild detergents to avoid surface damage and cross-contamination.
The incubator must be installed on a stable level surface with adequate ventilation and connected to a grounded power supply. After confirming the configuration, set the temperature and timer parameters on the touch-screen controller and lock the interface to prevent accidental changes.
Required Equipment: Touch-screen controller
- Confirm Configuration
Confirm the installation footprint and power supply specifications match the unit's requirements. - Set Parameters
Set the desired temperature, timer, and program parameters using the intelligent touch-screen controller. - Lock Interface
Activate the touch-screen lock to prevent unauthorized changes after setup.
How does the temperature fluctuation specification of ±0.3°C at high temperatures and ±0.5°C at low temperatures affect mold culture consistency in the 150L Intelligent Mold Incubator?
The tighter fluctuation of ±0.3°C at high temperatures (above ambient) supports stable, uniform conditions for active mold growth and fungal cultivation, reducing thermal stress on cultures. At low temperatures down to -5°C, the slightly wider ±0.5°C fluctuation remains adequate for preservation and storage applications where rapid temperature changes are less critical. The overall temperature uniformity of ±1.5°C at 25°C further minimizes position-dependent variation across the 150 L chamber, which is valuable when multiple vessels are loaded simultaneously.
Can the 150L Intelligent Mold Incubator be programmed for multi-stage temperature gradients to simulate environmental ramps?
Yes, the intelligent touch-screen controller supports 8 program groups with up to 8 steps per group, each settable from 0 to 5,999 minutes, enabling multi-stage programming for gradient temperature rise from the initial chamber condition. Auto start, standby, and shutdown functions can also be preset, allowing automated execution of complex incubation profiles without manual intervention. This capability is particularly useful for mold germination studies, fungal growth optimization, and accelerated stability testing where controlled temperature ramps are required.
What electrical and ambient temperature conditions are required to operate the 150L Intelligent Mold Incubator safely?
The incubator requires an AC220V 50Hz power supply with an input power of 850 W, and the ambient temperature must be maintained between +5°C and 35°C for proper operation. These specifications ensure reliable compressor performance and temperature control across the -5°C to 70°C range. Laboratories should verify their electrical infrastructure and room conditioning before installation to avoid performance degradation or safety issues.
The 150L Intelligent Mold Incubator (AF-MI150-BPMJ15T) delivers -5 to 70°C temperature control with ±0.3°C high-temp and ±0.5°C low-temp fluctuation, supported by a mirror stainless-steel chamber and touch-screen multi-step programming, though its uniformity of ±1.5°C at 25°C and -5°C operation require careful load distribution and stable ambient conditions for reliable mold and fungal culture.
Positive
- Multi-step programmability for gradient profiles: The touch-screen controller supports 8 program groups with up to 8 steps each, enabling automated gradient temperature ramps from initial chamber conditions for mold and fungal culture protocols.
- Sub-ambient cooling range: -5 to 70°C: A temperature range extending to -5°C allows refrigeration-based incubation for cold-tolerant molds and preservation workflows, bridging standard incubator and refrigerator capabilities.
Trade-offs
- Uniformity constraint ±1.5°C at 25°C: ±1.5°C temperature uniformity at 25°C introduces position-dependent thermal gradients inside the chamber, which may require careful load arrangement or periodic shelf repositioning for consistent results across multiple vessels.
- Ambient temperature dependency for low-end operation: The chamber requires +5 to 35°C ambient conditions, and achieving stable -5°C operation may be challenged in non-climate-controlled environments, potentially limiting placement in warm or variable lab spaces.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
