Moistureproof Nitrogen Cabinet 1435 L 1%-60% RH ATOMFAIR®

1435L-6 Moistureproof Nitrogen Integrated Cabinet

Research-grade laboratory product

Product Overview

The 1435 L configuration uses a standard white cabinet body, a humidity control range of 1%-60% RH, outer dimensions of 1200 × 700 × 1860 mm, inner dimensions of 1155 × 650 × 1680 mm and 5 adjustable shelves. The 1435 L layout uses a three-door cabinet.

This moistureproof nitrogen integrated cabinet combines electronic dehumidification with nitrogen control in one storage platform for efficient low-humidity recovery. It helps reduce moisture absorption, oxidation, optical haze, solderability loss and storage instability while lowering gas demand compared with ordinary nitrogen-only cabinet operation.

Typical application areas include research laboratories, electronics workshops, optical storage rooms, incoming-material control areas, powder and film storage spaces and quality-control environments that require low-humidity cabinet protection with efficient nitrogen management. This body type suits general laboratories, inspection rooms and organized storage areas.

The cabinet combines 1.2 mm galvanized steel cabinet with white exterior panels, tempered-glass viewing doors and magnetic sealing, an electronic dehumidification core with regenerative absorbent polymer, a precision nitrogen-control device, fully automatic switching between system modes and display-based cabinet management for dependable daily operation.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-MNIC1435-6
Product Family	Moistureproof Nitrogen Integrated Cabinet
Cabinet Body	Standard white cabinet body
Nominal Capacity	1435 L
Humidity Control Range	1%-60% RH
Outer Dimensions (W × D × H)	1200 × 700 × 1860 mm
Inner Dimensions (W × D × H)	1155 × 650 × 1680 mm
Adjustable Shelf Quantity	5
Door Configuration	Three-door cabinet
Cabinet Material	1.2 mm galvanized steel cabinet with white exterior panels and 5 mm tempered-glass viewing doors
Control Mode	Fully automatic switching between dehumidification and nitrogen-control modes
Dehumidification System	Electronic dehumidification core with regenerative absorbent polymer
Dehumidification Module Housing	ABS plus flame-retardant housing
Nitrogen Control System	Precision nitrogen-control device for rapid cabinet humidity reduction
Integrated Efficiency	Designed to reduce nitrogen usage by more than 50% compared with ordinary nitrogen cabinets
Suitable Stored Materials	Moisture-sensitive electronic parts, optical components, powders, films and laboratory materials

Key Features and Advantages

Integrated dual-system architecture combining an electronic dehumidification core with a precision nitrogen-control device.
High-performance absorbent polymer and regenerative dehumidification design for repeat-use moisture control.
ABS plus flame-retardant housing on the dehumidification module for durable routine cabinet operation.
Fully automatic switching logic between dehumidification and nitrogen-control modes according to cabinet humidity conditions.
Integrated cabinet design intended to reduce nitrogen usage by more than 50% compared with ordinary nitrogen cabinets.

Optional Items and Consultation

Anti-static cabinet body upgrade with ESD-compliant exterior coating for electrostatic-control environments.
Internal high-brightness LED lighting for improved visibility in cabinet interiors.
Stainless steel cabinet-body upgrade for cleaner or more corrosion-conscious storage environments.
Nitrogen generator configuration for applications that prefer an on-site nitrogen supply.
RS485 communication interface for PC-side monitoring and recorded cabinet-status management.
Over-humidity alarm device that triggers when measured humidity exceeds the configured set value.
If optional items are required, please contact inquiry@atomfair.com.

APPLICATION SCOPE: Suitable for research laboratories, electronics workshops, incoming-material control areas, powder and film storage rooms and quality-control environments that require low-humidity cabinet protection with efficient nitrogen management.

HANDLING & STORAGE: Install the cabinet on a stable indoor surface, keep the door closed during normal use, distribute stored items evenly across the 5 shelf levels, protect structural and sealing components during movement, and use reinforced wooden-crate packaging when shipment protection is required. Verify stable gas-supply conditions before operation.

IMPORTANT NOTICE: Confirm the correct model, cabinet body type, capacity and optional accessories before ordering. Inspect the cabinet after delivery, verify level installation and door sealing, and do not exceed the stated shelf-loading or application conditions. Confirm utility conditions such as power and gas connections before formal use.

TAILORED SOLUTIONS FOR RESEARCH

For bulk orders, configuration review, accessory matching or application-specific guidance, contact our engineering sales team.

EMAIL: inquiry@atomfair.com

Manufacturer: Atomfair LLC

Brand: ATOMFAIR®

The cabinet requires a stable indoor surface, reliable power supply, and a stable nitrogen gas connection for proper operation. Door sealing integrity and even weight distribution across shelves are critical to maintain humidity control performance.

Installation Surface Stability: The cabinet must be installed on a stable indoor surface to prevent tipping and maintain sealing integrity.
Utility Connections: Confirm stable power and nitrogen gas supply connections before operating the cabinet.
Door Sealing Verification: Verify level installation and proper door sealing after delivery to ensure humidity control.
Load Distribution: Distribute stored items evenly across the five shelves and do not exceed the stated shelf-loading capacity.
Movement Protection: Protect structural and sealing components during cabinet movement, using reinforced wooden-crate packaging for shipment.

HowTo

Follow these steps to install, connect utilities, and load the cabinet for optimal low-humidity storage. Proper setup ensures efficient nitrogen usage and cabinet performance.

Inspect Delivery
Inspect the cabinet after delivery for any visible damage or defects.
Install Cabinet
Install the cabinet on a stable indoor surface with adequate space for door operation.
Level and Seal
Verify level installation and ensure proper door sealing to maintain humidity control.
Connect Utilities
Connect the cabinet to a stable power supply and a nitrogen gas source with appropriate regulators.
Load Items
Distribute stored items evenly across the five shelves and do not exceed the stated load capacity.
Operate Normally
Keep the cabinet door closed during normal use and confirm humidity setpoints are achieved.

FAQ

What is the nitrogen consumption reduction advantage of the Atomfair AF-MNIC1435-6 integrated cabinet compared to a standard nitrogen-only cabinet?

The integrated cabinet reduces nitrogen usage by more than 50% compared with ordinary nitrogen cabinets. This is achieved by combining an electronic dehumidification core with a precision nitrogen-control device, allowing fully automatic switching between modes to minimize gas demand while maintaining low-humidity conditions.

What utility connections (power and gas) are required for the 1435L-6 moistureproof nitrogen cabinet, and can it be configured with an on-site nitrogen generator?

The cabinet requires a stable indoor power supply and a nitrogen gas connection for the precision nitrogen-control device. An optional nitrogen generator configuration is available for applications requiring an on-site nitrogen supply, avoiding external gas cylinder dependency. Confirm utility conditions such as power and gas connections before formal use.

What handling and storage precautions are critical to maintain the sealing integrity and performance of the 1435L-6 cabinet?

Install the cabinet on a stable indoor surface, keep doors closed during normal use, and distribute stored items evenly across the 5 adjustable shelves. During movement, protect structural and sealing components; use reinforced wooden-crate packaging for shipment. Verify level installation and door sealing after delivery, and do not exceed stated shelf-loading or application conditions.

Assessment

The 1435L-6 Moistureproof Nitrogen Integrated Cabinet delivers a dual-mode dehumidification and nitrogen purge system for large-volume storage of moisture-sensitive materials, with automatic switching and over 50% nitrogen savings versus ordinary nitrogen cabinets, but requires stable gas supply and dedicated lab space.

Positive

Integrated dual-mode moisture control: Combines electronic dehumidification with precision nitrogen control in one platform, reducing nitrogen usage by more than 50% compared with ordinary nitrogen-only cabinets.
Regenerative absorbent polymer dehumidification: Uses a high-performance absorbent polymer in a regenerative dehumidification core, enabling repeat-use moisture control without frequent desiccant replacement.

Trade-offs

Requires stable gas and power supply: Operational reliability depends on stable gas-supply conditions, power connections, and level installation; the cabinet is not portable and must be placed on a stable indoor surface.
Humidity range limited to 1%–60% RH: The humidity control range of 1%–60% RH may not be suitable for applications requiring ultra-low humidity levels below 1% RH, such as certain semiconductor or research processes.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).