|
115 L Standard Controller Microbiological Incubator
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The incubator requires a stable AC 220 V, 50 Hz power supply and an ambient temperature range of +5 to +35 °C for proper operation. The chamber must be kept accessible for cleaning and inspection, and the unit must be transported upright to prevent damage.
- Power supply: Connect the incubator only to a grounded AC 220 V, 50 Hz power outlet with the rated capacity of 550 W.
- Ambient temperature: Operate the incubator within an ambient temperature range of +5 to +35 °C to maintain accurate temperature control.
- Clearance and access: Ensure adequate clearance around the incubator for ventilation and access to the chamber, sensors, and control interfaces.
- Transport orientation: Keep the incubator upright during transport and use suitable lifting equipment to avoid internal damage.
- Chamber cleaning: Clean the mirror-finish stainless steel chamber regularly with appropriate non-abrasive cleaners to maintain hygiene and prevent contamination.
Follow these steps to safely install and operate the incubator for microbiological incubation. Ensure all safety checks and power connections are made before loading samples.
Required Equipment:
- Inspect for damage
Inspect the incubator for any transport damage before unpacking. - Position the incubator
Place the incubator on a stable, level surface with sufficient clearance for ventilation and access to all ports and interfaces. - Connect power
Connect the power cord to a grounded AC 220 V, 50 Hz outlet and verify the power supply matches the rated 550 W requirement. - Set temperature
Set the desired incubation temperature using the standard controller, allowing the chamber to stabilize before loading samples. - Load samples
Load samples onto the shelves, ensuring they do not block airflow and are spaced for even temperature distribution. - Test alarms
Verify that the high-temperature and over-temperature alarms are functional by testing them according to the user manual. - Monitor process
Monitor the incubation process through the observation window and record temperature data as needed.
How does the natural convection airflow in the Atomfair AF-MCBI-115A incubator affect sample evaporation and temperature uniformity during extended incubation?
Natural convection reduces sample evaporation risk by eliminating forced air movement, and it balances temperature uniformity with sample protection. The incubator operates with a temperature fluctuation of ±0.5°C and resolution of 0.1°C, supporting stable incubation conditions without fan-induced drying.
What optional data logging and communication capabilities are available for the 115 L standard controller microbiological incubator?
Optional accessories include a programmable controller, printer, U-disk data storage, RS485 interface with communication software, and an independent over-temperature controller. These allow configuration for documentation, remote monitoring, and contamination control (UV sterilization) as needed.
What are the power and space requirements for installing the Atomfair AF-MCBI-115A incubator in a laboratory?
The incubator requires AC 220 V, 50 Hz power supply and 550 W rated power. External dimensions are 785 × 587 × 715 mm (W × D × H). Ensure the working ambient temperature is +5 to +35°C and that the chamber, sensors, and controls remain accessible for operation and maintenance.
The 115 L Standard Controller Microbiological Incubator (AF-LE-E-MCBI-0115-9121) uses natural convection for gentle incubation with reduced sample evaporation, suitable for routine microbiological work. Its temperature range of RT+5 to 65°C and stainless steel chamber support reliable operation, but the limited temperature ceiling and ambient temperature dependency require careful laboratory planning.
Positive
- Natural convection reduces sample evaporation: The natural convection airflow operates without fan noise and minimizes sample evaporation, making it suitable for long-term microbiological incubation where sample integrity is critical.
- Stainless steel chamber for easy cleaning: The mirror-finish stainless steel chamber supports repeated cleaning and maintenance, reducing cross-contamination risks in routine laboratory use.
Trade-offs
- Limited temperature range up to 65°C: The maximum operating temperature of 65°C restricts applications to mesophilic incubation; high-temperature sterilization or thermophilic cultures cannot be performed in this unit.
- Ambient temperature dependency: The incubator requires a working ambient temperature of +5 to +35°C; deviations outside this range may affect temperature control accuracy and stability.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
