|
LCD Light Incubator, 800 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This incubator requires specific installation space, power supply, and ambient temperature conditions for stable operation. Continuous operation of at least 180 hours is recommended under proper installation conditions.
- Installation Space and Power: The chamber requires a clear space of at least 1475 x 890 x 1780 mm and a dedicated 2700 W, AC 220 V, 50 Hz power supply.
- Working Environment: The ambient temperature must be maintained between +5 and 30 °C for stable operation.
- Continuous Operation: For reliable performance, schedule continuous runs of at least 180 hours under proper installation conditions.
- Over-Temperature Alarm: The independent over-temperature alarm protects samples by stopping the unit and alerting users when abnormal conditions occur.
- Accessibility: Air inlets, test ports, shelving, drain areas, doors, and controller surfaces must remain accessible for cleaning and maintenance.
This procedure describes the initial setup and operation of the LCD Light Incubator 800 L. Follow these steps to ensure proper installation and safe continuous operation.
Required Equipment: Suitable lifting equipment
- Verify Installation Space and Power
Verify that the installation space accommodates the chamber's external dimensions of 1475 x 890 x 1780 mm and that the power supply meets the 2700 W, AC 220 V, 50 Hz requirement. - Unpack and Position the Chamber
Unpack the chamber while keeping it upright, and use suitable lifting equipment to position it in the prepared location. - Ensure Accessibility for Maintenance
Ensure that air inlets, test ports, shelving, drain areas, doors, and controller surfaces remain accessible for cleaning and maintenance. - Program Temperature and Lighting
Program the temperature and lighting schedule using the LCD microcomputer controller with menu-based operation. - Schedule Continuous Operation
For continuous operation, schedule runs of at least 180 hours under proper installation conditions.
What temperature range and uniformity can the LCD Light Incubator 800 L maintain in no-light versus illuminated operation?
In no-light mode the chamber maintains 4 to 50 °C; in illuminated mode the range is 10 to 50 °C. Temperature resolution is 0.1 °C and fluctuation/uniformity is ±1 °C, based on the stated specifications for this 800 L configuration.
Can the 800 L light incubator be configured for CO2 supplementation or external data logging?
Yes, the unit supports optional RS232/485 communication interface and software, embedded printer, USB data storage, wireless alarm system, CO2 inlet, infrared CO2 controller, and light-intensity detection/control system. Note that no active humidity control is stated for this configuration, so humidity-dependent protocols would require external assessment.
What installation space, power supply, and handling precautions are required for the 800 L LCD light incubator?
Plan for external dimensions of 1475 x 890 x 1780 mm and a 2700 W power requirement on AC 220 V, 50 Hz; the stated working environment is +5 to 30 °C. Keep the packed chamber upright and use suitable lifting equipment during unloading and positioning.
The LCD Light Incubator, 800 L features a 304 stainless steel interior with rounded corners, fluorine-free cooling with an imported compressor, and adjustable illumination up to 30000 lx, making it suitable for light-controlled incubation and plant cultivation. However, it lacks active humidity control and requires a 2700 W power supply, which may limit deployment in labs with strict environmental or electrical constraints.
Positive
- Fluorine-free compressor system: Imported compressor and fan components with fluorine-free design support efficient, long-life operation and stable low-temperature performance, reducing maintenance frequency in continuous use.
- Stainless steel interior with rounded corners: 304 stainless steel construction with rounded corners and removable shelving improves cleaning efficiency and sample layout flexibility, critical for repeated hygiene protocols and long-duration experiments.
Trade-offs
- No active humidity control: The unit does not include humidity regulation, limiting its use in applications requiring precise moisture control, such as fungal culture or seed germination under specific humidity conditions.
- High power consumption (2700 W): With a power requirement of 2700 W, the incubator demands a dedicated electrical circuit and adequate infrastructure, which may pose installation challenges in labs with limited power capacity.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
