|
LCD Light Incubator, 250 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The LCD Light Incubator requires a 220 V AC 50 Hz power supply and must be placed in an environment with ambient temperature between 5 and 30°C. Continuous operation of at least 180 hours is recommended for stable performance, and the unit must be kept upright during transport and positioning.
- Electrical Requirement: Connect the unit to a dedicated AC 220 V 50 Hz power supply with a maximum power draw of 1750 W.
- Environmental Condition: Operate the unit only in a room with ambient temperature between 5 and 30°C to ensure proper cooling system function.
- Installation Clearance: Ensure at least 760 x 815 x 1550 mm of floor space and keep all ventilation inlets, test ports, and drain areas unobstructed.
- Transport Guideline: Keep the packed chamber upright and use suitable lifting equipment during unloading and positioning.
- Operational Stability: Allow the chamber to run continuously for at least 180 hours after initial setup for stable temperature and lighting control.
This procedure describes the initial positioning, power connection, and configuration of the unit. The steps are derived from the manufacturer's handling and installation recommendations.
Required Equipment: Lifting equipment
- Confirm Installation Space
Measure the available floor space to ensure it accommodates the external dimensions of 760 x 815 x 1550 mm. - Unpack and Position
Keep the packed chamber upright and use suitable lifting equipment to move it to the installation location. - Connect Power Supply
Connect the unit to a dedicated AC 220 V 50 Hz power outlet with a circuit rated for 1750 W. - Configure Controller
Set the desired temperature and lighting parameters using the LCD microcomputer controller with menu-based operation. - Stabilize Chamber
Allow the chamber to operate continuously for at least 180 hours before introducing samples to ensure stable conditions.
What is the temperature stability and recovery performance of the LCD Light Incubator 250 L under continuous illuminated operation?
The incubator maintains a temperature fluctuation and uniformity of ±1 °C. In no-light mode, it operates from 4 to 50 °C, while illuminated mode (0–12000 lx, six-step adjustable) supports 10 to 50 °C. The fluorine-free cooling system with an imported compressor and circulation fan ensures stable chamber recovery, and continuous operation of 180 hours or more is recommended for optimal performance.
Can this 250 L incubator be configured with CO2 control or data communication for plant growth or microbial culture experiments?
Yes, the LCD Light Incubator supports optional accessories including a CO2 inlet and infrared CO2 controller for atmosphere control, as well as RS232/485 communication interface and software, USB data storage, an embedded printer, and a wireless alarm system. These options allow integration into documented long-term photoperiod or culture workflows requiring data logging or remote monitoring.
What are the installation infrastructure requirements for the LCD Light Incubator 250 L?
The unit requires an installation space meeting external dimensions of 760 × 815 × 1550 mm and a dedicated AC 220 V, 50 Hz power supply rated at 1750 W. Operating ambient temperature must be +5 to 30 °C. A left-side test port is provided for measurement access, and air inlets, doors, and controller surfaces must remain accessible for cleaning. The chamber should be shipped and kept upright, with suitable lifting equipment for positioning.
The Atomfair AF-MLI0250 (MGC-250) is a 250 L LCD light incubator with fluorine-free cooling, 304 stainless steel interior, and single-side six-step illumination up to 12000 lx. It provides temperature control from 4 to 50 °C (no-light) or 10 to 50 °C (illuminated) with ±1 °C uniformity, but lacks active humidity control and offers only single-side lighting, which may limit certain photoperiod experiments.
Positive
- Fluorine-free cooling with imported compressor: The fluorine-free design combined with an imported compressor and circulation-fan assembly supports efficient chamber operation and extended service life, maintaining stable low-temperature performance and recovery during repeated use.
- 304 stainless steel interior with rounded corners: The 304 stainless steel chamber interior with rounded corners and removable shelving improves cleaning efficiency and sample layout flexibility, facilitating repeated hygiene cycles and long-duration laboratory use.
Trade-offs
- No active humidity control: The standard configuration does not include active humidity control, which may limit applicability for workflows requiring precise humidity regulation, such as certain microbial or plant cultivation protocols.
- Single-side lighting only: This model (MGC-250) provides single-side illumination only, whereas other models in the family offer double-side, three-side, or partition lighting. Single-side lighting may be insufficient for experiments requiring uniform light distribution from multiple directions.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
