|
190 L Gas-Jacket 90 °C Sterilization CO2 Incubator, IR Sensor Economy Series
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This incubator requires specific environmental and safety conditions for reliable operation. Adhere to the listed constraints to prevent equipment damage or user injury.
- Power Supply Requirement: The unit must be connected to an AC 220 V, 50 Hz power supply with the rated operating power of 750 W.
- Ambient Temperature Range: Operate the incubator only within an ambient temperature range of +5 to +30 °C.
- Transport Orientation: Keep the packed unit upright during transport and use suitable lifting equipment to avoid impact damage.
- Accessibility for Maintenance: Position the incubator so that the chamber, sensors, shelves, filters, doors, test ports, and control interfaces remain accessible for cleaning, inspection, and operation.
- Optional Accessory Selection: Select optional accessories (humidity display, printer, communication interface, gas regulator, HEPA filtration) according to the required workflow before installation.
This procedure guides the installation and initial setup of the CO2 incubator. Follow these steps to ensure safe operation and proper configuration for cell culture workflows.
Required Equipment: Suitable lifting equipment
- Confirm Installation Space
Confirm that the installation space accommodates the 708 × 710 × 1030 mm external dimensions and verify the availability of an AC 220 V, 50 Hz power supply. - Unpack the Incubator
Unpack the incubator while keeping it upright and using suitable lifting equipment to prevent damage. - Position the Incubator
Position the incubator in the prepared location, ensuring access to the chamber, sensors, shelves, filters, doors, test ports, and control interfaces. - Install Optional Accessories
Select and install any required optional accessories such as the humidity display, printer, communication interface, gas regulator, or HEPA filtration according to the workflow. - Connect Power and Gas Supplies
Connect the unit to the specified power supply and, if applicable, to the CO2 gas source using the appropriate regulator. - Configure Setpoints
Configure the temperature and CO2 setpoints as required for the specific culture protocol, ensuring the temperature control range is RT +5 to 55 °C and CO2 range 0 to 20%. - Perform Sterilization Cycle
Perform a 90 °C sterilization cycle before loading cultures if the workflow requires a sterile chamber environment.
How quickly does the Atomfair AF-CO2E-190H CO2 incubator recover CO2 concentration and temperature after a typical 30-second door opening?
After a 30-second door opening, the CO2 concentration recovers to 5% within no more than 3 minutes, and the temperature recovers to 37°C within no more than 8 minutes, as specified in the technical specifications. These recovery times support repeatable incubation conditions during routine cell culture workflows in the 190 L gas-jacket model with infrared CO2 sensor.
What are the limitations of the Economy Series CO2 incubator for regulated research or clinical applications?
The Atomfair AF-CO2E-190H is part of the IR Sensor Economy Series, described as a value-focused upgrade line for routine non-medical laboratory use. While suitable for cell culture and CO2-controlled incubation in universities and quality-control labs, it may not meet GMP or clinical-grade requirements. Optional accessories such as HEPA filtration and communication interfaces can extend functionality but are not standard.
What are the installation space and power supply requirements for the Atomfair AF-CO2E-190H 190 L CO2 incubator?
The incubator has external dimensions of 708 × 710 × 1030 mm (W × D × H) and requires an AC 220 V, 50 Hz power supply with a rated power of 750 W. The installation space must accommodate these dimensions and allow access to the chamber, sensors, shelves, filters, and control interfaces for cleaning and operation. A working ambient temperature of +5 to +30 °C is also required.
The 190 L Gas-Jacket CO2 Incubator with IR sensor provides rapid CO2 and temperature recovery and 90°C sterilization, but its ambient temperature range and optional accessory dependency require careful lab infrastructure planning.
Positive
- Infrared CO2 sensor with fast recovery: Infrared CO2 control with ±0.1% accuracy and CO2 recovery time ≤3 minutes to 5% after a 30-second door opening, enabling stable culture conditions.
- 90°C sterilization and gas-jacket design: Gas-jacket heating and 90°C sterilization cycle support routine decontamination and reduce contamination risk, suitable for sensitive cell culture.
Trade-offs
- Ambient temperature dependency: Requires working ambient temperature +5 to +30°C, limiting placement in unconditioned laboratories or warm environments.
- Optional accessories not included: Humidity display, printer, communication interface, gas regulator, and HEPA filtration are optional; base unit lacks these features, requiring additional procurement and integration.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
