|
High-Intensity Programmable Light Incubator, 300 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
Operate the incubator within the specified ambient temperature range of +5 to 30°C and connect to a dedicated AC 220V, 50Hz power supply. Ensure unobstructed access to air inlets, exhaust paths, and control interfaces during installation and maintenance.
- Ambient Temperature Range: Maintain the working environment between +5°C and 30°C to ensure stable compressor and controller operation.
- Power Supply Requirements: Connect the unit to a dedicated AC 220V, 50Hz power supply rated at 1700W to prevent overloading.
- Transport and Handling: Keep the chamber upright during transport and use suitable lifting equipment to avoid structural damage.
- Installation Clearance: Allow sufficient space around the unit for ventilation, maintenance access, and door operation based on external dimensions 830 x 850 x 1850 mm.
- Safety Systems: The unit includes over-limit protection and wireless alarm to alert operators of abnormal conditions during unattended runs.
Position the chamber in a suitable location with adequate space and power supply, then unpack and inspect for shipping damage. Configure the programmable controller with the desired temperature, light, and time segments before running a test cycle.
Required Equipment: Suitable lifting equipment
- Inspect packaging
Inspect the packaging for damage and verify that the chamber orientation remains upright. - Position chamber
Position the chamber in the installation area, ensuring air inlets, exhaust paths, and control interfaces remain accessible. - Connect power
Connect the chamber to a dedicated AC 220V, 50Hz power outlet with appropriate amperage rating. - Configure controller
Configure the programmable controller by setting temperature, light intensity, and time segments for the desired cultivation program. - Verify safety systems
Verify that the over-limit protection and alarm systems are functional before starting an unattended run. - Start initial cycle
Start the incubator and monitor the initial cycle to confirm stable temperature and light output. - Record data settings
Record the program parameters and data logging settings if using optional communication or storage accessories.
What temperature range and uniformity can be expected from the 300 L high-intensity light incubator when operated with and without lighting?
With lighting, the temperature control range is 10 to 50 °C; without lighting, it is 0 to 50 °C. Temperature fluctuation and uniformity is ±1 °C across both modes. The six-step adjustable lighting (0 to 20000 lx) uses a three-side configuration. The chamber is programmable for independent temperature, light, humidity and time steps across 30 segments.
Can the Atomfair AF‑MPB0300 incubator be equipped with CO₂ monitoring and control for advanced plant growth applications?
Yes, an optional infrared CO₂ sensor package and a CO₂ inlet with controller are available for atmosphere-control configurations. This allows the chamber to support advanced cultivation programs requiring active CO₂ management, expanding its capability beyond standard temperature and light control.
What are the critical installation and electrical requirements for the 300 L programmable light incubator?
The chamber requires a 1700 W, AC 220 V, 50 Hz power supply and should be installed in a working environment of +5 to 30 °C. External dimensions are 830 × 850 × 1850 mm; confirm adequate space and keep air inlets, exhaust paths, shelves, ports, doors and control interfaces accessible for cleaning and maintenance. Dual imported compressors with automatic alternating operation support long‑duration running stability.
The High-Intensity Programmable Light Incubator, 300 L (AF-LE-E-M2HP-0300-BP35) provides 0–20000 lx six-step adjustable lighting with three-side or partition options, a 30-segment programmable controller for temperature, humidity, light, and time, and dual compressors for long-duration stability, but the base configuration lacks active humidity control and limits low-temperature operation to 10°C when lighting is active.
Positive
- High-intensity six-step adjustable lighting: Provides 0–20000 lx illumination with six-step adjustability and three-side or partition lighting options, enabling repeatable light conditions for demanding plant-growth protocols.
- Programmable 30-segment environmental control: Allows independent setting of temperature, humidity, light intensity, and time across 30 segments, supporting complex day-night or staged cycles for cultivation and climate simulation.
Trade-offs
- Narrower low-temperature range with lighting: When lighting is active, the minimum controllable temperature is 10°C, limiting applications that require simultaneous illumination and sub-10°C conditions.
- No active humidity control in base configuration: The unit does not include active humidity control; humidity deviation is specified at ±5–7%RH, which may affect protocols requiring precise humidity regulation unless optional upgrades are added.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
