|
50 L Gas-Jacket UV Sterilization CO2 Incubator, IR Sensor Economy Series
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
Operate within the specified ambient temperature range of +5 to +30°C and power supply of AC 220V, 50Hz. Ensure the unit is installed with adequate clearance for airflow and access to chamber, sensors, and control interfaces.
- Transport and Handling: Transport the incubator upright and use suitable lifting equipment to prevent damage during movement.
- Installation Space Verification: Confirm the available space meets the external dimensions of 580×450×730 mm before installation.
- Accessibility Requirements: Keep the chamber, sensors, shelves, filters, doors, test ports, and control interfaces accessible for cleaning, inspection, and operation.
- Optional Accessory Selection: Select optional accessories (humidity display, printer, communication interface, gas regulator, HEPA filtration) according to the required workflow.
- Gas Inlet Filter Maintenance: Maintain the microbial filter at the gas inlet to reduce contamination risk in the chamber atmosphere.
This procedure describes the initial setup and safe operation of the 50L gas-jacket CO2 incubator. Follow these steps to install, configure, and begin incubation while maintaining chamber hygiene and accessibility.
Required Equipment: Suitable lifting equipment, Power supply (AC 220V, 50Hz), Gas regulator (optional), HEPA filter (optional)
- Transport to Installation Site
Transport the packed incubator upright using suitable lifting equipment to the installation area. - Verify Installation Space and Power
Confirm that the installation space accommodates the external dimensions (580×450×730 mm) and provides the required AC 220V, 50Hz power supply. - Position and Access
Position the incubator and ensure the chamber, sensors, shelves, filters, doors, test ports, and control interfaces remain accessible. - Connect Power and Accessories
Connect the power supply and install any selected optional accessories (e.g., gas regulator, HEPA filter, communication interface). - Set Temperature and CO2 Parameters
Set the temperature control to the desired setpoint within the range RT+5 to 55°C and CO2 concentration within 0 to 20%. - Stabilize Chamber Conditions
Allow the chamber to stabilize to the set temperature and CO2 concentration before loading samples. - Load Samples and Begin Incubation
Load culture samples onto the shelves and initiate the incubation workflow.
What is the CO2 recovery time after a 30-second door opening, and how does the infrared sensor maintain ±0.1% accuracy?
The CO2 recovery time is no more than 3 minutes to return to 5% concentration after a 30-second door opening. The infrared CO2 sensor provides ±0.1% control accuracy, enabling stable CO2 conditions for routine culture workflows as specified in the technical specifications.
Which optional accessories are required to enable data logging and remote monitoring of incubation conditions in this 50L gas-jacket CO2 incubator?
Optional communication interface and printer accessories are available for data logging and remote monitoring. The communication interface allows external data recording, while the printer provides hard-copy records of temperature, CO2, and humidity parameters. These are listed as optional functions in the product description.
How is humidity maintained above 90% without active humidification in this gas-jacket CO2 incubator?
Humidity is achieved through natural evaporation from a water pan, reaching 90% or higher as stated in the technical specifications. The gas-jacket heating system provides uniform temperature distribution, which supports stable evaporation and minimizes condensation, maintaining high humidity for sensitive cell culture workflows.
The 50 L Gas-Jacket UV Sterilization CO2 Incubator with IR sensor provides ±0.1% CO2 accuracy and ≤3-minute CO2 recovery after door opening, but requires a strictly controlled ambient temperature range of +5 to +30 °C and relies on natural evaporation for humidity, which limits precision in moisture-sensitive applications.
Positive
- Infrared CO2 sensing with fast recovery: Infrared sensor achieves ±0.1% CO2 control accuracy and recovers to 5% CO2 within 3 minutes after a 30-second door open, maintaining stable culture conditions.
- Gas-jacket design with UV sterilization: Gas-jacket heating combined with UV sterilization and microbial gas inlet filtration reduces contamination risk in routine cell culture workflows.
Trade-offs
- Narrow ambient temperature tolerance: The incubator requires a working ambient temperature of +5 to +30 °C; operation outside this range may compromise temperature control stability and recovery performance.
- Passive humidity control via natural evaporation: Relative humidity is achieved only through natural evaporation (≥90% RH) without active humidification or feedback control, limiting reproducibility in humidity-sensitive applications.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
