Four-Sided Strong-Light Laboratory Incubator 460 L ATOMFAIR®

Four-Sided Strong-Light Incubator, 460 L

Research-grade laboratory product

Product Overview

Four-Sided Strong-Light Incubator, 460 L is a practical chamber for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection. It brings together 460 l of usable space, 5 to 60 C and 0 to 18000 lux (6 levels) illumination, so the chamber can keep samples in a steady, repeatable working condition.

The cabinet combines a visible glass inner door, cleanable stainless-steel surfaces and a strong-light layout for demanding growth experiments. The cabinet uses a mirror-finish stainless-steel inner chamber, a tempered-glass inner door, a cold-rolled steel exterior and four-sided strong lighting, with an internal working room of 600 x 650 x 1100 mm and an external footprint of 845 x 1000 x 1875 mm. That combination of chamber size, shell build and liner material makes the unit easier to place, clean and use in routine laboratory work.

The four-sided strong-light layout is suited to experiments that need higher illumination intensity while still using the standard programmable incubation framework. The stated input power is 1200 W, and the timer range is 0 to 9999 min. It is well suited to the day-to-day work listed above, including culture, incubation, climate simulation or illuminated growth tasks, depending on the family.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-GZX460F
Capacity	460 L
Temperature Control Range	5 to 60 C
Temperature Resolution	0.1 C
Temperature Uniformity	+/- 1 C
Light Intensity	0 to 18000 Lux (6 levels)
Lighting Faces	4 faces
Controller	LCD microcomputer programmable controller
Chamber Material	Mirror-finish stainless-steel inner chamber
Exterior Shell	Cold-rolled steel shell with electrostatic powder coating
Power / Input	1200 W
Power Supply	AC220V 50Hz
Timer Range	0 to 9999 min
Internal Dimensions	600 x 650 x 1100 mm
External Dimensions	845 x 1000 x 1875 mm
Net Weight	225 Kg
Shelves / Trays	2 shelves
Configuration Note	Four-sided strong lighting supports high-light cultivation and comparison tests

Performance Features

Four-sided strong lighting supports higher-intensity plant-growth experiments. This supports repeatable plant-growth and photoperiod experiments.
Programmable temperature and light control helps maintain repeatable experimental conditions. This supports repeatable plant-growth and photoperiod experiments.
Mirror-finish stainless-steel surfaces and a glass inner door support observation and cleaning. This helps with cleaning, corrosion resistance and long-term laboratory use.
Self-diagnosis, over-temperature self-limiting and power-off memory help protect the chamber during routine use. This helps preserve operation settings after power interruptions.
The series uses a clean cabinet structure with removable shelving for easier loading and maintenance. This supports more reliable day-to-day chamber use.
High-intensity illumination makes the series suitable for stronger light-demanding samples. This supports repeatable plant-growth and photoperiod experiments.

APPLICATION SCOPE: Suitable for plant growth, tissue culture, seed germination, cultivation, seedling raising, microbial culture and preservation, medicinal-material and building-material testing, insect rearing and quality inspection in universities, laboratories, research institutes and quality-control environments that need controlled chamber performance.

HANDLING: Keep the chamber level, leave enough room for ventilation and confirm the selected shelf and lighting configuration before operation. Every unit is shipped with reinforced packaging for transport safety; keep the unit upright during unloading and positioning.

IMPORTANT NOTICE: When set temperature is 10 C or below, ambient temperature should not exceed 26 C. The page notes no humidity control for this series and indicates performance data are measured at standard no-load test conditions. Any quoted amount refers to the chamber body only and does not include freight. Freight should be confirmed separately according to the delivery destination.

LABORATORY PROCUREMENT SUPPORT

For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

The incubator requires a level position with adequate ventilation and a stable ambient temperature. When set temperature is 10°C or below, ambient temperature must not exceed 26°C, and the chamber has no humidity control.

Ambient Temperature Constraint: When set temperature is 10°C or below, ambient temperature should not exceed 26°C to maintain performance.
Placement and Ventilation: Keep the chamber level and leave enough room for ventilation to ensure proper operation.
Configuration Verification: Confirm the selected shelf and lighting configuration before operation as per the experiment requirements.
No Humidity Control: The chamber does not provide humidity control, so environmental humidity must be managed externally if needed.
Performance Data Reference: Performance data are measured at standard no-load test conditions and may differ under loaded conditions.

HowTo

This procedure outlines the initial setup and configuration steps for the Four-Sided Strong-Light Incubator. Following these steps ensures safe and reliable operation for plant growth and incubation experiments.

Position the Chamber
Position the chamber on a level surface with adequate ventilation, keeping it upright during unloading.
Confirm Configuration
Confirm the selected shelf and lighting configuration are appropriate for the intended experiment.
Verify Ambient Temperature Constraint
Verify that ambient temperature does not exceed 26°C when operating at a set temperature of 10°C or below.

FAQ

What temperature uniformity can I expect from the Atomfair AF-GZX460F four-sided strong-light incubator, and how does that affect reproducibility in plant growth experiments?

The 460 L incubator maintains a temperature uniformity of ±1°C across the 5 to 60°C control range, with a resolution of 0.1°C. This level of uniformity, combined with the programmable LCD microcomputer controller, supports repeatable plant-growth and photoperiod experiments by keeping samples in a steady, repeatable working condition.

Can the four-sided strong-light incubator support high-light-demanding species with its 0 to 18000 lux illumination system?

Yes, the chamber provides 0 to 18000 lux across six adjustable levels from four sides (four-sided strong lighting), making it suitable for experiments requiring higher illumination intensity within a standard programmable incubation framework. The mirror-finish stainless-steel inner chamber and tempered-glass inner door further support observation of high-light-demanding samples.

What are the power and ambient temperature constraints for operating the 460 L four-sided incubator, especially at low set temperatures?

The incubator requires a 1200 W, AC220V 50Hz power supply. When the set temperature is 10°C or below, the ambient temperature must not exceed 26°C. The unit has no humidity control, and performance data are measured under standard no-load test conditions. These factors should be considered when planning installation and experiment protocols.

Assessment

The Four-Sided Strong-Light Incubator (460 L) provides high-intensity illumination up to 18000 lux from four sides with programmable temperature and light control, suitable for plant growth and microbial culture. However, operation below 10°C requires ambient temperature ≤26°C and the unit lacks humidity control.

Positive

Four-sided strong lighting up to 18000 lux: Four-sided illumination at 18000 lux (6 levels) supports high-light-demanding plant growth and comparison experiments, enabling repeatable photoperiod studies.
Programmable temperature and light control: LCD microcomputer controller with 0.1°C resolution and ±1°C uniformity maintains repeatable conditions across 5–60°C, supporting reproducible incubation and growth protocols.

Trade-offs

Ambient temperature constraint at low setpoints: When set temperature is ≤10°C, ambient temperature must not exceed 26°C, limiting placement in warm labs or during summer operation without additional cooling.
No humidity control: The chamber lacks built-in humidity regulation, restricting its use for experiments requiring precise or stable relative humidity levels.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).