Forced-Air Constant Temperature Incubator 150 L ATOMFAIR®

Forced-Air Constant Temperature Incubator, 150 L

Research-grade laboratory product

Product Overview

Forced-Air Constant Temperature Incubator, 150 L is a practical chamber for microbial culture, seed germination and drug stability testing. It brings together 150 l of usable space, RT+5 to 70 C, so the chamber can keep samples in a steady, repeatable working condition.

The chamber uses a removable shelf structure, a side observation light switch and corrosion-resistant 304 stainless-steel inner surfaces to make routine use and cleaning easier. The cabinet uses a heating and air-circulation system with a 304 stainless-steel chamber and a cold-rolled steel outer shell, with an internal working room of 400 x 500 x 750 mm and an external footprint of 680 x 640 x 1020 mm. That combination of chamber size, shell build and liner material makes the unit easier to place, clean and use in routine laboratory work.

Automatic three-speed air circulation and programmable PID heating help the chamber maintain a uniform incubation environment. The stated input power is 600 W, and the timer range is 1 min to 9999 h 59 min. It is well suited to the day-to-day work listed above, including culture, incubation, climate simulation or illuminated growth tasks, depending on the family.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-DHP150C
Capacity	150 L
Temperature Control Range	RT+5 to 70 C
Temperature Resolution	0.1 C
Temperature Uniformity	+/- 1.5 C
Temperature Fluctuation	+/- 0.5 C
Controller	LCD liquid crystal controller with automatic 3-speed fan adjustment
Chamber Material	304 stainless-steel working chamber
Exterior Shell	Powder-coated cold-rolled steel shell
Power / Input	600 W
Power Supply	AC220V/50Hz
Timer Range	1 min to 9999 h 59 min
Internal Dimensions	400 x 500 x 750 mm
External Dimensions	680 x 640 x 1020 mm
Net Weight	67 Kg
Shelves / Trays	3 shelves
Configuration Note	Independent lighting switch for chamber observation; 316 stainless steel and perforated or non-perforated shelves can be customized

Performance Features

Automatic 3-speed fan control reduces energy use when the chamber approaches the target temperature. This helps improve chamber circulation and temperature uniformity.
PID heating control helps deliver uniform and stable temperature rise for culture work. This supports more stable setpoint tracking and quicker recovery after door openings.
An independent lighting switch makes it easier to check samples without disturbing the chamber unnecessarily. This supports repeatable plant-growth and photoperiod experiments.
304 stainless-steel construction supports corrosion resistance and routine cleaning. This helps with cleaning, corrosion resistance and long-term laboratory use.
Removable shelves and adjustable shelf spacing help match different sample layouts. This supports more reliable day-to-day chamber use.
316 stainless-steel and shelf style customization supports more demanding laboratory requirements. This helps with cleaning, corrosion resistance and long-term laboratory use.

APPLICATION SCOPE: Suitable for microbial culture, seed germination and drug stability testing in universities, laboratories, research institutes and quality-control environments that need controlled chamber performance.

HANDLING: Verify shelf load, chamber space and the selected stainless-steel configuration before installation. Keep the air-circulation path unobstructed for best temperature uniformity. Every unit is shipped with reinforced packaging for transport safety; keep the unit upright during unloading and positioning.

IMPORTANT NOTICE: The model supports 316 stainless-steel customization and perforated or non-perforated shelf options. The page does not list separate accessory pricing or delivery terms. Any quoted amount refers to the chamber body only and does not include freight. Freight should be confirmed separately according to the delivery destination.

LABORATORY PROCUREMENT SUPPORT

For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

The chamber requires an unobstructed air-circulation path to maintain specified temperature uniformity of ±1.5°C. The unit must remain upright during unloading and positioning to prevent damage to the heating and circulation system.

Temperature Uniformity Constraint: Temperature uniformity of ±1.5°C is maintained only when the air-circulation path is kept unobstructed.
Transport Orientation Constraint: The unit must be kept upright during unloading and positioning to avoid compromising the internal heating and air-circulation system.
Shelf Load Constraint: Shelf load capacity and chamber space must be verified before installation to prevent structural overload.

HowTo

Position the incubator upright on a level surface with unobstructed ventilation around the unit. Verify power supply compatibility and shelf configuration before initial operation.

Required Equipment: Level surface, AC220V/50Hz power outlet

Position the incubator
Place the incubator upright on a level, stable surface with at least 10 cm clearance around the unit for air circulation.
Connect power supply
Connect the unit to a dedicated AC220V/50Hz power outlet rated for at least 600 W input.
Configure shelves
Install the provided 3 shelves at desired spacing, ensuring they are securely seated on the support rails.
Set temperature parameters
Set the target temperature using the LCD controller, allowing the PID system to stabilize before loading samples.
Load samples
Place samples on the shelves, ensuring they do not block the internal air-circulation path.
Verify temperature uniformity
Allow the chamber to reach setpoint and confirm temperature uniformity using an independent calibrated thermometer.

FAQ

How does the automatic three-speed fan control improve temperature uniformity and energy efficiency in the Atomfair AF-DHP150C forced-air incubator?

The automatic three-speed fan control reduces energy use when the chamber approaches the target temperature, helping to maintain uniform circulation and temperature uniformity. The PID heating controller further supports stable setpoint tracking and quicker recovery after door openings. The chamber achieves a temperature uniformity of ±1.5°C and fluctuation of ±0.5°C.

Can the Atomfair AF-DHP150C incubator be customized for use with corrosive samples or high-humidity applications?

Yes, the incubator supports customization with 316 stainless steel for the chamber and shelves, which offers enhanced corrosion resistance compared to the standard 304 stainless steel. Additionally, perforated or non-perforated shelf options can be specified to match different sample types and airflow requirements. The standard 304 stainless steel chamber is already corrosion-resistant and easy to clean for routine laboratory use.

What are the installation and power requirements for the Atomfair AF-DHP150C forced-air incubator?

The incubator requires a power supply of AC220V/50Hz with an input power of 600 W. It has an external footprint of 680 x 640 x 1020 mm and weighs 67 kg. For optimal temperature uniformity, keep the air-circulation path unobstructed. The unit should be kept upright during transport and positioning. The timer range is 1 min to 9999 h 59 min, suitable for extended experiments.

Assessment

The AF-LE-E-DHPC-0150-9155 Forced-Air Constant Temperature Incubator (150 L) provides a RT+5 to 70 °C range with ±1.5 °C uniformity and ±0.5 °C fluctuation, supported by PID heating and automatic three-speed fan control for stable culture conditions. Its 304 stainless-steel chamber and customizable 316 stainless-steel or perforated shelf options offer corrosion resistance and flexibility, though the powder-coated exterior and 220 V/50 Hz power requirement introduce placement and infrastructure constraints.

Positive

PID heating with auto three-speed fan: The PID controller and automatic three-speed fan adjustment reduce energy consumption near setpoint and improve temperature uniformity for microbial culture and stability testing.
Corrosion-resistant 304 SS chamber: 304 stainless-steel interior and customizable 316 stainless-steel or perforated/non-perforated shelves simplify cleaning and support demanding laboratory environments with longer service life.

Trade-offs

Power supply and voltage specific: The unit requires AC 220 V/50 Hz input, which may necessitate a step-down transformer or dedicated circuit in regions using 110 V or 60 Hz mains, adding infrastructure cost before deployment.
Powder-coated steel exterior susceptibility: The cold-rolled steel outer shell with powder coating is less resistant to chemical spills or high-humidity environments than a stainless-steel cabinet, requiring careful lab placement and spill management.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).