Electric Heated Incubator 35 L, 200 W, 65 °C ATOMFAIR®

35 L Standard Controller Electric Heated Constant Temperature Incubator

Research-grade laboratory product

Product Overview

35 L Standard Controller Electric Heated Constant Temperature Incubator is designed for routine constant temperature incubation, culture work, sample holding, and general laboratory heating workflows. Electric heating, forced convection airflow, glass observation door, and optional programmable control for routine incubation work. The configuration provides RT + 5 to 65 °C, 200 W rated power, a working chamber of 340 × 320 × 320 mm (W × D × H), and external dimensions of 620 × 490 × 490 mm (W × D × H).

The control and chamber design support practical laboratory operation: Standard controller or LCD controller in B variants. laboratory chamber construction

The product supports repeatable incubation workflows through the family-specific control, airflow, sterilization, monitoring and alarm functions shown in the technical specifications. Available optional functions include LCD or programmable controller; printer; U-disk data storage; RS485 interface and communication software; UV sterilization; independent over-temperature controller.

This equipment is suited to laboratories that need routine constant temperature incubation, culture work, sample holding, and general laboratory heating workflows, with installation, power supply, chamber access and selected configuration reviewed before use.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-EHIN-035A
Product Family	Electric Heated Constant Temperature Incubator
Configuration	35 L Standard Controller
Rated Operating Power	200 W
Working Chamber Size	340 × 320 × 320 mm (W × D × H)
Overall Dimensions	620 × 490 × 490 mm (W × D × H)
Model Configuration	Standard controller
Temperature Control Range	RT + 5 to 65 °C
Temperature Resolution / Fluctuation	0.1 °C / ±0.5 °C
Working Ambient Temperature	+5 to +35 °C
Power Supply	AC 220 V, 50 Hz
Controller Options	Standard controller or LCD controller in B variants
Airflow	Forced convection with adjustable circulation fan
Sterilization	Optional UV sterilization
Optional Accessories and Functions	LCD or programmable controller; printer; U-disk data storage; RS485 interface and communication software; UV sterilization; independent over-temperature controller

Performance Features

This product family uses electric heating and a forced convection airflow system to improve temperature response and chamber uniformity. This supports repeated cleaning, sample organization and dependable laboratory maintenance.
A glass inner door or observation window supports chamber viewing during incubation work. This supports repeated cleaning, sample organization and dependable laboratory maintenance.
Optional programmable control supports multi-step temperature and time programming for selected configurations. This allows the configuration to match documentation, communication and monitoring needs in routine constant temperature incubation, culture work, sample holding, and general laboratory heating workflows.
Optional printer, U-disk export, communication interface, and UV sterilization are listed for this family. This supports chamber hygiene and contamination-control routines for routine constant temperature incubation, culture work, sample holding, and general laboratory heating workflows.
Independent over-temperature protection is available as an option in the source accessory list. This supports controlled, repeatable operation for routine constant temperature incubation, culture work, sample holding, and general laboratory heating workflows.
Higher-capacity vertical models use larger cabinet formats with three or four standard shelves. This supports controlled, repeatable operation for routine constant temperature incubation, culture work, sample holding, and general laboratory heating workflows.

APPLICATION SCOPE: Suitable for routine constant temperature incubation, culture work, sample holding, and general laboratory heating workflows in universities, research institutes, quality-control laboratories and other scientific workflows where controlled incubation conditions are required.

HANDLING: Before installation, confirm the available space against the 620 × 490 × 490 mm (W × D × H) external dimensions and provide the required power supply shown in the technical specifications. Keep the chamber, sensors, shelves, filters, doors, test ports and control interfaces accessible for cleaning, inspection and operation. During transport, every incubator is protected with reinforced packaging to reduce movement and impact risk; keep the packed unit upright and use suitable lifting equipment.

IMPORTANT NOTICE: Select optional accessories and functions according to the required workflow: LCD or programmable controller; printer; U-disk data storage; RS485 interface and communication software; UV sterilization; independent over-temperature controller. Any displayed amount refers to the incubator body only and does not include freight. Freight is quoted separately; please contact us for shipping confirmation.

LABORATORY PROCUREMENT SUPPORT

For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

Install the incubator on a stable, level surface with sufficient clearance for the 620×490×490 mm external dimensions and access to a grounded AC 220 V, 50 Hz power outlet. Maintain the working ambient temperature between +5 and +35 °C and consider adding the optional independent over-temperature controller for enhanced safety.

Ambient Temperature Constraint: Operate the incubator only within the ambient temperature range of +5 to +35 °C as specified in the technical specifications.
Power Supply Requirement: Connect the unit to a grounded AC 220 V, 50 Hz power outlet that matches the rated power consumption of 200 W.
Over-Temperature Protection: Install the optional independent over-temperature controller to provide additional safety against overheating.
Ventilation Clearance: Ensure the forced convection airflow is not obstructed by maintaining clearance around the incubator's ventilation openings.

HowTo

This procedure guides the user through the initial setup and safe operation of the Atomfair 35 L incubator. Follow the steps to confirm space, connect power, and select optional accessories before use.

Confirm Installation Space
Confirm that the installation space accommodates the 620×490×490 mm external dimensions and provides access to a grounded AC 220 V, 50 Hz power outlet.
Position the Incubator
Position the incubator on a level surface and ensure that the chamber, sensors, shelves, and controls remain accessible for cleaning and operation.
Select Optional Accessories
Select and install any required optional accessories such as the LCD controller, printer, or UV sterilization module before use.

FAQ

What temperature stability is achieved by the Atomfair AF-EHIN-035A 35 L incubator?

The incubator provides a temperature control range of RT+5 to 65 °C with a resolution of 0.1 °C and a fluctuation of ±0.5 °C. The forced convection airflow system with an adjustable circulation fan improves chamber uniformity, though no specific uniformity value is stated in the product specifications.

What are the power and ambient temperature requirements for installing the 35 L standard controller incubator?

The incubator requires a power supply of AC 220 V, 50 Hz, with a rated power of 200 W. The working ambient temperature range is +5 to +35 °C. External dimensions of 620 × 490 × 490 mm (W × D × H) must be accommodated with adequate bench space and ventilation.

Does the standard controller incubator include independent over-temperature protection?

The base standard controller model does not include independent over-temperature protection; it is listed as an optional accessory. If critical sample protection is required, the independent over-temperature controller option should be selected at the time of order.

Assessment

The 35 L Standard Controller Electric Heated Constant Temperature Incubator (AF-EHIN-035A) uses forced convection airflow to improve temperature uniformity and response for routine incubation between RT+5 and 65°C, with optional over-temperature protection and data logging, but requires a conditioned ambient environment (5–35°C) and a dedicated 220 V, 50 Hz power supply.

Positive

Forced convection airflow uniformity: The forced convection system with adjustable circulation fan improves temperature response and chamber uniformity, supporting reliable sample incubation and reproducible results.
Optional over-temperature protection: An independent over-temperature controller is available as an optional accessory, adding a safety layer to prevent thermal runaway and protect sensitive samples.

Trade-offs

Ambient temperature dependency: The incubator requires a working ambient temperature range of +5 to +35°C; operation outside this range will affect temperature control stability and may require climate-controlled laboratory space.
Fixed power supply requirement: The unit is designed for AC 220 V, 50 Hz power; installations with different voltage or frequency standards will require a step-down transformer or frequency converter, adding infrastructure cost.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).