|
220 L Standard Controller Microbiological Incubator
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The incubator must be installed in a space that accommodates its external dimensions of 915 × 657 × 870 mm and connected to a dedicated AC 220 V, 50 Hz power supply. The ambient operating temperature must be maintained between +5 and +35 °C, and the chamber, sensors, and control interfaces must remain accessible for cleaning and inspection.
- Transport Constraint: Transport the incubator in an upright position using suitable lifting equipment to prevent damage.
- Power Supply Constraint: Connect the incubator only to the specified AC 220 V, 50 Hz power supply to avoid electrical hazards.
- Ambient Temperature Constraint: Operate the incubator only within an ambient temperature range of +5 to +35 °C to ensure proper performance.
- Accessibility Constraint: Keep the chamber, sensors, and control interfaces accessible for routine cleaning, inspection, and operation.
The incubator must be transported upright, installed with adequate space and power, and configured with the required accessories before first use. All steps are derived from the manufacturer's handling and installation instructions.
Required Equipment: Lifting equipment
- Transport the Incubator
Transport the incubator in its upright position using suitable lifting equipment to prevent damage to internal components. - Confirm Installation Space and Power
Confirm the available space against the external dimensions of 915 × 657 × 870 mm and connect the incubator to the specified AC 220 V, 50 Hz power supply. - Ensure Accessibility of Components
Ensure the chamber, sensors, shelves, filters, doors, test ports, and control interfaces remain accessible for cleaning, inspection, and operation. - Configure Optional Accessories
Select the required optional accessories and functions according to the workflow before starting the incubator.
How does natural convection airflow in the Atomfair AF-MCBI-220A microbiological incubator affect temperature uniformity and sample evaporation?
Natural convection reduces sample evaporation risk because it operates without forced air movement, but it also results in a temperature fluctuation of ±0.5 °C (resolution 0.1 °C). The 220 L chamber (650 × 500 × 680 mm) is designed to balance uniform heating with sample protection, making it suitable for culture observation where minimizing evaporation is critical.
What optional accessories are available for data logging, remote monitoring, and contamination control on the AF-MCBI-220A?
The incubator supports optional LCD or programmable controllers, a printer, U-disk data storage, RS485 interface with communication software, UV sterilization, and an independent over-temperature controller. These options allow users to configure the system for documentation, remote monitoring, and chamber hygiene without modifying the core natural-convection design.
What are the power supply and installation space requirements for the 220 L Standard Controller Microbiological Incubator?
The incubator requires AC 220 V, 50 Hz power with a rated operating power of 900 W. The external dimensions are 915 × 657 × 870 mm (W × D × H), and the working ambient temperature must be between +5 and +35 °C. Ensure adequate clearance for the chamber, sensors, and door access, and keep the unit upright during transport.
The 220 L Standard Controller Microbiological Incubator (AF-MCBI-220A) uses natural convection with a 900 W heater to maintain RT+5 to 65°C, offering reduced sample evaporation and quiet operation. Its stainless-steel chamber and optional UV sterilization support contamination control, while the observation window and alarm functions enhance workflow monitoring.
Positive
- Natural convection reduces evaporation: Natural convection airflow operates without fan noise and lowers sample evaporation risk, which is beneficial for extended microbiological incubation where moisture retention is critical.
- Optional UV sterilization for contamination control: An optional UV sterilization function is available to support chamber hygiene and contamination control routines, aiding in maintaining sterile conditions during culture work.
Trade-offs
- Limited temperature range above ambient: The temperature control range is RT+5 to 65°C, restricting use to incubation above room temperature and preventing applications requiring sub-ambient or high-temperature (>65°C) conditions.
- Requires controlled ambient environment: The working ambient temperature must be between +5 and +35°C, necessitating installation in a climate-controlled laboratory space to maintain specified performance.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
