|
80 L Biological Safety Incubator with HEPA Filtration
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The incubator requires a working ambient temperature of +5 to +30 °C and a power supply of AC 220 V, 50 Hz. HEPA filtration and UV sterilization are standard; optional 90 °C high-temperature and high-humidity sterilization is available for decontamination.
- Temperature Control Constraint: Temperature control range is RT + 5 to 50 °C with stability of ±0.1 °C and uniformity of ±0.5 °C at 37 °C.
- Installation Space Constraint: Confirm available space against external dimensions of 590 × 687 × 790 mm (W × D × H) before installation.
- Sterilization Method Constraint: UV sterilization is standard; optional 90 °C high-temperature and high-humidity sterilization system is available for inner chamber decontamination.
- Accessory Selection Constraint: Select optional accessories including independent over-temperature controller, embedded printer, USB data storage, RS485 interface, electronic signature function, or smart App control system according to workflow requirements.
Install the incubator in a space meeting the external dimensions and power supply requirements, then configure the touchscreen controller for incubation. Perform UV sterilization before use and select optional accessories as needed for the workflow.
Required Equipment: Touchscreen controller with password lock, HEPA filter, UV sterilization system
- Verify Installation Space
Confirm the installation area accommodates the external dimensions of 590 × 687 × 790 mm (W × D × H) and provides AC 220 V, 50 Hz power supply. - Unpack and Position Incubator
Keep the packed unit upright during transport, use suitable lifting equipment, and place the incubator on a level surface with accessible chamber, sensors, shelves, filters, doors, test ports, and control interfaces. - Set Temperature Parameters
Use the touchscreen controller to set the desired incubation temperature within the range of RT + 5 to 50 °C, and enable password lock to prevent unintended changes. - Perform UV Sterilization
Activate the UV sterilization system before loading samples to decontaminate the chamber interior. - Load Samples and Start Incubation
Place culture vessels on stainless-steel shelves, close the door, and allow the chamber to stabilize at the set temperature before initiating the incubation workflow.
What is the temperature uniformity of the 80 L Biological Safety Incubator at 37 °C, and how does the gas-jacket heating method achieve this?
The incubator maintains a temperature uniformity of ±0.5 °C at 37 °C. This is achieved through gas-jacket microcomputer PID control combined with six-side heating, which reduces condensation and supports stable culture conditions across the 400 × 450 × 500 mm (W × D × H) working chamber.
Can the 80 L Biological Safety Incubator be integrated into a centralized laboratory monitoring system?
Yes, integration is supported via the optional RS485 interface and communication software, as well as the smart App control system. The touchscreen controller also offers USB data storage and electronic signature function for traceable operation, allowing connection to external monitoring and documentation workflows.
What are the power supply and ambient temperature requirements for reliable operation of this incubator?
The incubator requires an AC 220 V, 50 Hz power supply and must be operated within a working ambient temperature range of +5 to +30 °C. These conditions are specified in the technical specifications to ensure stable temperature control and HEPA filtration performance.
This 80 L biological safety incubator provides HEPA filtration and gas-jacket six-side heating for stable, contamination-controlled incubation, but requires AC 220V/50Hz power and operates only from RT+5 to 50°C, limiting its use to above-ambient applications.
Positive
- HEPA Filtration and UV Sterilization: HEPA filtration maintains cleaner chamber air, reducing airborne contamination risk for sensitive culture work; UV sterilization provides additional decontamination within the incubation cycle.
- Gas-Jacket Six-Side Heating: Six-side heating minimizes condensation and delivers ±0.1°C stability and ±0.5°C uniformity at 37°C, supporting reproducible culture conditions.
Trade-offs
- Limited Temperature Range: Operates only from RT+5 to 50°C, making it unsuitable for low-temperature or sub-ambient incubation workflows; requires laboratory ambient temperature between +5 and +30°C.
- Specific Power Supply Required: Requires AC 220V, 50 Hz power; may not be compatible with all laboratory electrical infrastructure without voltage conversion or frequency adjustment.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
