|
Top-Light Incubator, 360 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The incubator must be operated on a level surface with adequate ventilation, and the ambient temperature must not exceed 26°C when the set temperature is 10°C or below. The unit requires a grounded AC220V 50Hz power supply, and the relative humidity should be maintained below 90% to prevent electrical hazards.
- Temperature-dependent ambient limit: When set temperature is 10°C or below, ambient temperature must not exceed 26°C.
- Power supply requirements: The incubator requires a grounded AC220V 50Hz electrical supply with a rated input power of 900 W.
- Humidity operating limit: Relative humidity must be below 90% to avoid electrical and corrosion risks.
- Handling upright requirement: The unit must be kept upright during unloading and positioning to prevent internal damage.
- Ventilation clearance: Leave enough room around the chamber for proper air circulation and heat dissipation.
Position the incubator on a level surface with adequate ventilation and connect it to a grounded AC220V 50Hz power outlet. Program the temperature and light intensity using the LCD controller for the desired photoperiod experiment.
Required Equipment: Top-Light Incubator 360 L unit, LCD microcomputer controller
- Level and ventilate
Position the incubator on a level surface and ensure adequate clearance around the unit for ventilation. - Connect power supply
Connect the power cord to a grounded AC220V 50Hz electrical outlet. - Configure temperature and light
Set the desired temperature and light intensity using the programmable LCD controller. - Verify safety features
Confirm the over-temperature self-limiting and power-off memory functions are active before operation. - Load samples
Load samples onto the removable shelves, ensuring proper spacing for air circulation. - Close doors and start
Close the inner glass door and outer door securely, then start the programmed cycle. - Monitor conditions
Monitor the chamber periodically through the glass door and record temperature and light conditions as needed.
What is the temperature uniformity specification of the Top-Light Incubator 360 L, and how does the 6-level light intensity control affect experimental reproducibility?
The incubator maintains temperature uniformity of ±1°C across the 360 L chamber. The light intensity is adjustable from 0 to 10000 Lux in 6 discrete levels, allowing reproducible photoperiod experiments. The top lighting and glass door support visual inspection without disturbing conditions.
Does the Top-Light Incubator 360 L require a specific power supply, and are there any ambient temperature restrictions for low-temperature operation?
The incubator requires AC220V 50Hz power input. When the set temperature is 10°C or below, the ambient temperature must not exceed 26°C; the general working environment is 5-40°C with relative humidity below 90%. This ensures proper compressor operation and temperature control.
What are the handling and installation requirements for the 360 L Top-Light Incubator to ensure safe operation and longevity?
The unit must be kept level with adequate ventilation. The reinforced packaging requires upright transport and positioning. The internal dimensions are 600x600x1000 mm with an external footprint of 835x755x1695 mm, and net weight 135 kg, so floor loading and space must be considered. The mirror-finish stainless steel and glass inner door facilitate cleaning and maintenance.
The Top-Light Incubator, 360 L offers programmable temperature and light control with a mirror-finish stainless-steel chamber and tempered-glass inner door, supporting plant growth and microbial culture. Operational constraints include an ambient temperature limit at low setpoints and only 6 discrete light intensity levels.
Positive
- Programmable temperature and light control: LCD microcomputer controller enables repeatable photoperiod and temperature profiles for plant growth and illuminated incubation experiments.
- Cleanable stainless-steel chamber and glass door: Mirror-finish stainless-steel inner chamber and tempered-glass inner door facilitate visual inspection, cleaning, and corrosion resistance for long-term laboratory use.
Trade-offs
- Ambient temperature limit at low setpoints: When the set temperature is 10°C or below, ambient temperature must not exceed 26°C, restricting placement in warmer environments or requiring additional cooling.
- Discrete light intensity levels: Light intensity is adjustable only across 6 discrete levels from 0 to 10000 Lux, limiting fine-grained control for photoperiod experiments requiring continuous dimming.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
