|
LCD Artificial Climate Chamber, 450 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The LCD Artificial Climate Chamber requires specific environmental and power infrastructure for reliable operation. Its temperature, humidity, and lighting controls are subject to defined operating ranges and safety limits.
- Ambient Temperature Requirement: The chamber must be installed in an environment maintained between 5°C and 30°C to ensure stable performance.
- Power Supply Specification: The unit requires a dedicated AC 220 V, 50 Hz power supply capable of supporting 2000 W input.
- Continuous Operation Constraint: Proper installation conditions are necessary to support continuous operation schedules of at least 180 hours.
- Over-Temperature Safety Feature: An independent over-temperature alarm protects samples during unattended operation by notifying operators of abnormal conditions.
- Installation Space Requirement: The chamber requires a clear installation area of at least 950 x 850 x 1850 mm to accommodate its external dimensions and allow access for maintenance.
Proper installation ensures safe operation and longevity of the climate chamber. Follow these steps to position and prepare the unit for first use.
Required Equipment: suitable lifting equipment
- Confirm Installation Space
Measure the available area to ensure it accommodates the chamber's external dimensions of 950 x 850 x 1850 mm. - Prepare Power Supply
Verify that a dedicated AC 220 V, 50 Hz power outlet with 2000 W capacity is available near the installation site. - Unpack and Position Chamber
Keep the packed chamber upright and use suitable lifting equipment to move it to the installation location. - Access Maintenance Points
Ensure that air inlets, test ports, shelving, drain areas, doors, and controller surfaces remain accessible for cleaning and maintenance.
Why is the temperature range different when the MGC-400H chamber lights are on versus off?
The specified temperature range is 4 to 50 C in no-light mode and 10 to 50 C in illuminated mode. This narrower low-end range must be considered when designing experiments that require simultaneous low temperature and high illumination.
Can the MGC-400H artificial climate chamber be integrated with CO2 control, data logging, or remote alarm systems?
Yes, through optional accessories including a CO2 inlet and infrared CO2 controller for atmosphere support, RS232/485 communication interface and software for data output, USB data storage, an embedded printer, and a wireless alarm system. These options allow the chamber to be adapted for alarm notification, programmable operation, and application-specific monitoring.
What installation space, power supply, and operating environment are required for the 450 L artificial climate chamber?
Plan for external dimensions of 950 x 850 x 1850 mm and a 2000 W power requirement at AC 220 V, 50 Hz; the specified working environment is +5 to 30 C. Keep air inlets, test ports, shelving, drain areas, doors and controller surfaces accessible for cleaning and maintenance, and keep the packed chamber upright with suitable lifting equipment during unloading and positioning.
This 450L LCD artificial climate chamber delivers combined temperature, humidity, and light control using an imported compressor and humidity sensor, making it suitable for plant cultivation, insect rearing, and environmental simulation. The illuminated mode operates from 10°C to 50°C with a humidity range of 50-90%RH and ±5-7%RH deviation, which imposes operational constraints for low-temperature illuminated experiments and precise humidity-dependent protocols.
Positive
- Imported compressor and humidity sensor: Utilizes imported compressor and humidity sensor components for reliable temperature and humidity control, supporting stable long-duration cultivation and simulation workflows.
- Stainless-steel interior with removable shelving: 304 stainless-steel chamber interior and removable shelving facilitate cleaning, hygiene maintenance, and flexible sample space adjustment for repeated laboratory use.
Trade-offs
- Illuminated mode temperature floor: When lights are active, the minimum controllable temperature is 10°C, preventing sub-10°C illuminated operation and limiting low-temperature photoperiod studies.
- Moderate humidity control precision: Humidity deviation is specified as ±5% to 7%RH, which may not meet the requirements of applications demanding tighter humidity stability or high-precision conditioning.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
