|
LCD Light Incubator, 150 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
The chamber requires a stable working environment of 5–30°C and must be operated on a continuous schedule of at least 180 hours under proper installation conditions to maintain temperature stability. The over-temperature alarm will trigger a shutdown if abnormal conditions occur, requiring immediate operator intervention to protect samples.
- Temperature Range Constraint: Temperature must be maintained within 4–50°C in no-light mode and 10–50°C in illuminated mode to avoid equipment damage or sample loss.
- Power Supply Constraint: The unit requires a dedicated AC 220 V, 50 Hz power supply capable of delivering 1500 W to ensure stable compressor and fan operation.
- Continuous Operation Requirement: Continuous operation schedules of at least 180 hours are recommended, and proper installation conditions must be verified to prevent drift or failure.
- Accessibility Constraint: Air inlets, test ports, shelving, drain areas, doors, and controller surfaces must remain accessible for cleaning and maintenance to prevent overheating or contamination.
- Over-Temperature Response: The independent over-temperature alarm will stop the unit and alert the operator when abnormal conditions occur, requiring immediate diagnosis and corrective action.
Confirm installation space against the external dimensions of 690 x 800 x 1410 mm and prepare the specified 220 V, 50 Hz power supply. Unpack the unit upright using suitable lifting equipment and position it with all air inlets and service panels accessible.
Required Equipment: Suitable lifting equipment (e.g., pallet jack or forklift)
- Confirm installation space
Verify that the installation area accommodates the external dimensions of 690 x 800 x 1410 mm and allows clearance for air inlets and service access. - Prepare the power supply
Ensure a dedicated AC 220 V, 50 Hz outlet with 1500 W capacity is available and correctly grounded. - Unpack the chamber upright
Keep the packed chamber vertical during unpacking and use suitable lifting equipment to move it to the installation location. - Position the chamber
Place the unit on a level, stable surface, leaving all air inlets, test ports, drain areas, doors, and controller surfaces accessible for cleaning. - Verify proper installation conditions
Confirm that the working environment is between 5–30°C and that the unit is set for continuous operation of at least 180 hours to maintain stability.
Why does the temperature control range differ between no-light mode (4 to 50°C) and illuminated mode (10 to 50°C) on the Atomfair LCD Light Incubator 150 L?
The difference in minimum temperature arises because the illumination system generates heat, raising the chamber's baseline thermal load when lights are active. The no-light mode can reach 4°C, while illuminated mode is limited to 10°C due to this added heat. Temperature fluctuation and uniformity are maintained at ±1°C in both modes, as specified in the technical data.
What lighting configurations are available for the AF-MLI0150 LCD Light Incubator, and how do they support different incubation workflows?
The base configuration provides single-side lighting with six-step adjustable intensity from 0 to 12000 lx. The product description notes that lighting form varies by model and includes options for double-side, three-side, or partition lighting. These configurations allow users to match illumination distribution to cultivation depth and chamber size, which is critical for plant-growth and photoperiod experiments that depend on repeatable lighting conditions.
What are the continuous operation recommendations and installation requirements for the Atomfair LCD Light Incubator 150 L?
The incubator is recommended for continuous operation of at least 180 hours under proper installation conditions. Installation requires a space of 690 x 800 x 1410 mm, a dedicated AC 220V, 50 Hz, 1500 W power supply, and an ambient temperature range of +5 to 30°C. The unit uses a fluorine-free cooling system with imported compressor and fan components for efficient long-term operation, and air inlets and test ports must remain accessible for cleaning and maintenance.
The LCD Light Incubator (150L) offers a 304 stainless-steel chamber with fluorine-free cooling and adjustable illumination up to 12000 lx, suitable for microbial and plant cultivation. However, the ±1°C temperature uniformity and lack of active humidity control impose operational constraints for precision-sensitive or humidity-dependent workflows.
Positive
- Fluorine-free cooling with imported compressor: Efficient, long service life, and stable low-temperature performance due to the fluorine-free design and imported compressor and fan components.
- 304 stainless steel interior with rounded corners: Enhances cleaning efficiency and sample layout flexibility with removable shelving, supporting repeated laboratory use and hygiene.
Trade-offs
- Limited temperature uniformity: Temperature fluctuation and uniformity of ±1°C may require careful sample placement for workflows sensitive to spatial temperature gradients.
- No integrated humidity control: Absence of active humidity regulation limits applicability for experiments requiring precise moisture conditioning, such as seed germination or fungal studies.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
