|
Programmable Artificial Climate Chamber, 300 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This document specifies the environmental and technical constraints for operating the Atomfair AF-M2H0300 programmable artificial climate chamber. Adherence to these parameters ensures reliable performance and sample integrity.
- Temperature operating range: Operate the chamber with lighting only between 10 °C and 50 °C, and without lighting between 0 °C and 50 °C.
- Humidity operating range: Maintain humidity setpoints between 50 %RH and 90 %RH to stay within the specified deviation of ±5 %RH to ±7 %RH.
- Working environment temperature: Ensure the ambient working environment temperature stays between +5 °C and 30 °C for proper compressor and controller function.
- Power supply requirement: Provide a dedicated AC 220 V, 50 Hz power supply capable of delivering 1700 W to the chamber.
- Air circulation clearance: Keep air inlets, exhaust paths, shelves, ports, doors, and control interfaces accessible to allow unobstructed air circulation and maintenance.
Follow these steps to install and set up the Atomfair AF-M2H0300 climate chamber for controlled biological cultivation. Proper installation ensures stable environmental control and safe operation.
Required Equipment: suitable lifting equipment
- Confirm installation space
Confirm that the installation space accommodates the external dimensions of 830 × 850 × 1850 mm with accessible clearances. - Prepare power supply
Prepare a dedicated AC 220 V, 50 Hz power supply rated for 1700 W near the installation location. - Position and unpack chamber
Keep the packed chamber upright and use suitable lifting equipment to move it to the installation site, then unpack carefully. - Connect power and verify environment
Connect the chamber to the prepared power supply and verify that the ambient temperature is between +5 °C and 30 °C. - Configure programmable controller
Set the programmable controller with the desired temperature, humidity, light intensity, and time parameters for the multi-step cultivation program.
What is the temperature uniformity and fluctuation of the Atomfair AF-M2H0300 climate chamber?
The temperature uniformity and fluctuation is ±1°C across the 300 L working volume. This specification applies to the entire controlled range: with lighting (10 to 50°C) and without lighting (0 to 50°C). The chamber achieves this using two alternating imported compressors and a circulation-air layout that limits direct draft on samples.
Does the AF-M2H0300 support CO2 control for plant growth or tissue culture experiments?
Yes, CO2 control is available as an optional package. The chamber can be configured with a CO2 inlet and an infrared CO2 controller integrated with the programmable system. When this option is selected, the infrared CO2 sensor provides feedback for maintaining setpoint concentrations during long-duration cultivation or climate simulation.
What power supply and installation space are required for the Atomfair AF-M2H0300 climate chamber?
The chamber requires a 1700 W power supply at AC 220 V, 50 Hz. External dimensions are 830 x 850 x 1850 mm, so installation space must accommodate these footprints with access for air inlets, exhaust paths, doors, and control interfaces. Confirm power supply availability and clearance before installation.
The Atomfair AF-M2H0300 300 L programmable artificial climate chamber provides dual-imported-compressor alternating operation for sustained long-duration stability, a full-range programmable controller (30 segments) for multi-parameter cycling of temperature, humidity, and six-step LED illumination, and optional infrared CO2 control; however, the ±1 °C temperature uniformity, ±5–7% RH humidity deviation, and 1700 W continuous power draw impose planning constraints for sensitive assays and facility infrastructure.
Positive
- Alternating dual-compressor long-run stability: Two imported compressors alternate operation to support continuous chamber use over weeks or months, reducing single-point fatigue and improving low-temperature reliability for extended cultivation or stability studies.
- Multi-segment programmable climate cycling: Up to 30 independent program segments allow time-based sequencing of temperature (0–50 °C), humidity (50–90% RH), and six-step LED light intensity (0–28,000 lx), enabling reproducible diurnal or multi-phase incubation protocols.
Trade-offs
- Moderate temperature uniformity tolerance: Specified temperature fluctuation and uniformity of ±1 °C may limit suitability for applications requiring ultra-tight thermal gradients, such as certain enzymatic or material-stability assays, within the 300 L volume.
- High continuous power consumption: The 1700 W power rating and reliance on dual compressors for long-duration operation require dedicated circuit capacity (220 V, 50 Hz) and raise operational energy costs for continuous use in shared lab spaces.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
