|
Programmable LED Light Incubator, 1500 L
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||||||
|
Supplier: Atomfair
Brand: ATOMFAIR®
|
This document defines installation, electrical, handling and configuration limits for the AF-M2B1500 incubator. These constraints must be satisfied to maintain safe and stable long-duration chamber operation.
- Installation Space and Environment: Install the chamber in a +5 to 30 C working environment with clearance for the external dimensions of 1570 x 1475 x 2050 mm.
- Electrical Supply: Connect the unit only to an AC 220 V 50 Hz supply capable of supporting the stated power input of 4300 W.
- Transport and Handling: Keep the packed chamber upright and use suitable lifting equipment to reduce movement and impact during transport.
- Accessibility for Maintenance: Keep air inlets, exhaust paths, shelves, ports, doors and control interfaces accessible for cleaning and maintenance.
- Configuration Selection: Select the required controller, lighting, humidity, communication and optional accessory configuration before ordering.
Confirm the installation site meets the chamber's spatial, environmental and electrical requirements before unpacking. Position the chamber upright, connect power, and program the controller before starting operation.
Required Equipment: suitable lifting equipment, AC 220 V 50 Hz power supply, programmable controller
- Confirm installation site
Confirm the installation space accommodates the external dimensions of 1570 x 1475 x 2050 mm and a working environment of +5 to 30 C. - Prepare power supply
Prepare a dedicated AC 220 V 50 Hz power supply rated for the stated power input of 4300 W. - Position chamber upright
Position the packed chamber upright using suitable lifting equipment before removing reinforced packaging. - Verify access for maintenance
Verify air inlets, exhaust paths, shelves, ports, doors and control interfaces remain accessible for cleaning and maintenance. - Configure program parameters
Set the programmable controller's multi-segment temperature, humidity, light intensity and time parameters according to the cultivation protocol. - Start long-duration operation
Start the long-duration operation cycle and monitor alarm or fault displays for abnormal conditions.
How does the alternating compressor design in the 1500 L programmable LED light incubator support long-duration stability?
The unit uses two imported compressors with an alternating long-duration operation design that automatically switches between compressors to distribute wear and extend operational life. This design supports dependable low-temperature performance and continuous running stability for cultivation programs lasting weeks or months, as stated in the product specifications.
What data logging and external communication options are available for the AF-M2B1500 incubator?
The incubator supports optional RS485 or RS232 communication interface and software, an embedded printer, USB data storage, and a wireless alarm system. These options enable operation records, trend review, and remote monitoring for integration into laboratory data workflows.
What installation space and power infrastructure are required for the 1500 L LED light incubator?
The incubator has external dimensions of 1570 x 1475 x 2050 mm and requires a 4300 W power supply at AC 220 V, 50 Hz. The working environment must be +5 to 30°C. Installation planning should ensure adequate clearance for air inlets, exhaust paths, and access to shelves, ports, doors, and control interfaces.
The 1500 L Programmable LED Light Incubator (SKU AF-LE-E-M2LP-1500-B150) uses dual imported compressors with alternating operation for continuous long-duration cultivation, a programmable multi-segment controller for temperature, humidity, light, and time, and a 0–55000 lx six-step LED lighting system. However, the base configuration lacks active humidity control, and the 4300 W power draw plus large footprint (1570 x 1475 x 2050 mm) require careful installation planning.
Positive
- Dual alternating compressors for long-duration running: Two imported compressors automatically alternate to support continuous chamber operation, ensuring stable low-temperature performance and reliable running over weeks or months.
- Multi-segment programmable controller: Up to 30 program segments with independent temperature, humidity, light intensity, and time settings enable precise environmental tracking for complex incubation, cultivation, or stability-study workflows.
Trade-offs
- No active humidity control in base configuration: The product specification states no active humidity control for this configuration; passive humidity deviation of ±5% to 7% RH applies, which may limit applications requiring tight humidity regulation.
- High power draw and large footprint: The 4300 W power requirement and external dimensions of 1570 x 1475 x 2050 mm demand dedicated electrical infrastructure and adequate installation space; working environment must be +5 to 30 °C.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
