LED Plant Growth Chamber 505 L Humidity Control ATOMFAIR®

LED Plant Growth Chamber, 505 L, with Humidity Control

Research-grade laboratory product

Product Overview

LED Plant Growth Chamber, 505 L, with Humidity Control is a LED plant growth chamber designed for plant growth, seed germination, tissue culture, crop seedling studies, algae growth and laboratory climate simulation. This configuration offers 505 l working volume, Without light: 5 to 45 C; with single-layer light: 10 to 45 C; with double-layer light: 15 to 45 C, 50%rh to 90%rh humidity capability, standard tricolor led spectrum, optional full-spectrum and high-intensity modules lighting, sus304 stainless-steel chamber interior and 7-inch color touchscreen programmable controller for controlled laboratory operation.

The family uses a foamed cabinet structure, adjustable shelf support, modular LED lighting and a circulation-air design intended to keep each layer within a stable control band. The chamber uses dual imported compressors with long-duration operation design together with imported temperature-humidity sensor for H-series configurations, 2 light decks, helping the unit fit continuous cultivation, incubation, climate simulation or stability workflows where repeatable environmental control matters.

The series is presented for natural-environment simulation and long-duration cultivation, with optional CO2 and data functions available where the workflow requires expanded control. Installation planning can be based on the external size of 910 x 930 x 1840 mm with power requirement 2900 W. Optional functions such as rs485 or 232 communication interface and software; embedded printer; usb data storage; wireless alarm system; co2 inlet; infrared co2 controller; light-intensity automatic control; app control; multi-level user permissions allow the chamber to be configured for data logging, alarm notification, atmosphere support and application-specific monitoring.

Technical Specifications

Parameter	Specification / Available Values
Atomfair Model	AF-PGH0505
Capacity	505 L
Temperature Control Range	Without light: 5 to 45 C; with single-layer light: 10 to 45 C; with double-layer light: 15 to 45 C
Temperature Resolution	0.1 C
Temperature Fluctuation / Uniformity	+/- 0.5 C
Humidity Function	50%RH to 90%RH
Humidity Deviation	+/- 3%RH at 80%RH
Lighting Configuration	standard tricolor LED spectrum, optional full-spectrum and high-intensity modules; multi-level LED lighting system; standard tricolor LED spectrum; optional full-spectrum, four-color and high-intensity monochromatic modules
Controller	7-inch color touchscreen programmable controller
Chamber Material	SUS304 stainless-steel chamber interior
Power / Input	2900 W
Power Supply	AC 220 V, 50 Hz
Working Environment	0 to 35 C
Sensor Configuration	imported temperature-humidity sensor for H-series configurations
Cooling System	dual imported compressors with long-duration operation design
Internal Dimensions	650 x 620 x 1260 mm
External Dimensions	910 x 930 x 1840 mm
Shelves / Light Decks	2 light decks
Program Function	multi-segment programming for temperature, humidity, lighting intensity and time
Configuration Note	Humidity display and control included
Optional Accessories and Functions	RS485 or 232 communication interface and software; embedded printer; USB data storage; wireless alarm system; CO2 inlet; infrared CO2 controller; light-intensity automatic control; App control; multi-level user permissions

Performance Features

Programmable temperature, humidity, lighting and time control supports segmented cultivation cycles. This helps improve environmental tracking for incubation, cultivation and stability-study workflows.
SUS304 chamber construction and adjustable shelf supports help keep the interior easy to clean and configure. This supports more reliable day-to-day laboratory use in plant growth, seed germination, tissue culture, crop seedling studies, algae growth and laboratory climate simulation.
LED lighting options include tricolor standard modules plus optional full-spectrum and high-intensity solutions. This supports plant-growth or climate-chamber work that depends on repeatable illumination conditions.
Long-duration running design uses imported compressors and energy-saving cooling control. This supports dependable low-temperature performance and long-duration running stability.
Optional CO2 monitoring, wireless alarm and App features expand the chamber for advanced plant research workflows. This helps protect samples and alert operators when abnormal conditions appear.
User-account management, data storage and communication options support traceable operation. This supports more reliable day-to-day laboratory use in plant growth, seed germination, tissue culture, crop seedling studies, algae growth and laboratory climate simulation.

APPLICATION SCOPE: Suitable for plant growth, seed germination, tissue culture, crop seedling studies, algae growth and laboratory climate simulation in universities, research institutes, pharmaceutical quality-control laboratories, agricultural research programs and industrial test environments that require controlled chamber operation.

HANDLING: Confirm installation space against 910 x 930 x 1840 mm, prepare the stated power supply, and keep air inlets, exhaust paths, shelves, ports, doors and control interfaces accessible for cleaning and maintenance. Every unit is shipped with reinforced packaging to reduce movement and impact during transport; keep the packed chamber upright and use suitable lifting equipment.

IMPORTANT NOTICE: Select the required controller, lighting, humidity, communication and optional accessory configuration before ordering. Any displayed amount refers to the chamber body only and does not include freight. Freight is quoted separately and should be confirmed with shipping details.

LABORATORY PROCUREMENT SUPPORT

For model selection, accessory matching, installation-space review, power-supply confirmation or configuration support, contact our technical sales team.

E-MAIL: inquiry@atomfair.com

Supplier: Atomfair

Brand: ATOMFAIR®

This plant growth chamber requires adherence to specific environmental and infrastructure parameters for stable performance. Temperature and humidity control depend on lighting configuration, ambient conditions, and proper installation practices.

Lighting-dependent temperature range: Temperature control depends on lighting load: operating without light enables a 5°C lower set point, while double-layer lighting limits the minimum to 15°C.
Humidity regulation limits: Humidity regulation is available from 50% to 90% RH with specified accuracy at 80% RH; performance may degrade outside this range.
Power and ambient temperature requirements: The chamber must be connected to a dedicated AC 220V 50Hz power supply capable of 2900W continuous load and operated within 0–35°C ambient temperature.
Ventilation clearance: Adequate clearance around the unit's air inlets and exhaust paths is required to maintain stable temperature and humidity control.
Transport and positioning constraints: The chamber must remain upright during transport and installation; use suitable lifting equipment to position it on a level surface.

HowTo

Follow these steps to install and prepare the chamber for safe and effective operation. The process covers site verification, unpacking, power connection, and ventilation verification.

Required Equipment: Suitable lifting equipment

Verify site and power compatibility
Confirm that the installation space accommodates the external dimensions 910 x 930 x 1840 mm and that the power supply is AC 220 V 50 Hz with sufficient capacity.
Unpack and position the chamber
Unpack the chamber while keeping it upright and use suitable lifting equipment to move it into position.
Connect power and ensure ventilation
Connect the chamber to the specified power supply and ensure that air inlets and exhaust paths remain accessible for proper ventilation.

FAQ

How does the temperature control range shift when using different lighting configurations in the LED Plant Growth Chamber 505L?

The temperature control range depends on the lighting load: without light it is 5 to 45 °C; with single-layer light it is 10 to 45 °C; with double-layer light it is 15 to 45 °C. This trade-off means that using both light decks raises the minimum achievable temperature by 10 °C compared to no-light operation.

What is the difference between the standard tricolor LED and the optional full-spectrum or high-intensity lighting modules for plant growth applications?

The standard configuration uses a tricolor LED spectrum suitable for general plant growth, seed germination, and tissue culture. Optional full-spectrum, four-color, and high-intensity monochromatic modules are available to support specific photomorphogenic responses or higher photosynthetic photon flux densities required in more demanding research protocols. The chamber can be ordered with the lighting type that best matches the target crop or experimental design.

What power supply and installation space are required for the LED Plant Growth Chamber 505L with humidity control?

The chamber requires a 220 V, 50 Hz AC power supply with a 2900 W capacity and must be placed in a 0 to 35 °C working environment. The external dimensions are 910 x 930 x 1840 mm, and installation planning should ensure clearance for air inlets, exhaust paths, and accessible ports. The unit is shipped upright in reinforced packaging and should be moved with suitable lifting equipment.

Assessment

This 505 L LED plant growth chamber with humidity control provides a SUS304 stainless steel interior and programmable multi-segment control for temperature, humidity, lighting, and time, suitable for plant growth and climate simulation. The dual compressor system supports long-duration operation, but the temperature range narrows under active lighting, and humidity is limited to 50-90%RH, which may constrain certain low-humidity or high-light applications.

Positive

SUS304 stainless steel interior and adjustable shelves: The chamber interior is constructed from SUS304 stainless steel with adjustable shelf supports, facilitating easy cleaning and reconfiguration for various laboratory workflows such as plant growth, seed germination, and tissue culture.
Programmable multi-segment environmental control: The 7-inch touchscreen controller enables multi-segment programming for temperature, humidity, lighting intensity, and time, supporting segmented cultivation cycles and repeatable environmental tracking for incubation and stability studies.

Trade-offs

Temperature range constrained under active lighting: The temperature control range is reduced when lighting is active: without light it is 5 to 45°C, but with single-layer light it is 10 to 45°C, and with double-layer light it is 15 to 45°C. This limits low-temperature operation when illumination is required.
Humidity range limited to 50-90%RH: The humidity control capability is specified from 50%RH to 90%RH, with a deviation of ±3%RH at 80%RH. This range does not support low-humidity experiments or applications requiring humidity below 50%RH.

Quality Standards & Performance Verification

Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.

To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.

Shipping & Returns

Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).