|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 160 × 160 × 10 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered titanium foam sheet is a passive filtration medium constrained by media compatibility, operating pressure, temperature, target flow, and dimensional tolerance. The porous structure must be protected from crushing and contamination, and service temperature is limited to 300°C.
- Media Compatibility Review: Verify that the process medium is compatible with the titanium or titanium-alloy material before installation or operation.
- Pressure and Temperature Limits: Confirm that operating pressure, temperature, and target flow remain within the sheet's rated service envelope, with recommended service temperature not exceeding 300°C.
- Surface Protection: Protect the porous surfaces from crushing and contamination during handling, storage, and installation.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
Inspect the sheet, confirm process compatibility, install without damaging the porous structure, and clean using a medium-appropriate method. Review filtration rating and PPI together with the assembly requirements before operation.
- Inspect the sheet
Inspect the sintered titanium sheet for visible contamination, deformation, or damage before handling or installation. - Confirm compatibility
Confirm that the media, operating pressure, temperature, target flow, and dimensional tolerances are compatible with the 160 × 160 × 10 mm sheet and its 100 µm filtration rating. - Protect porous surfaces
Protect the porous surfaces from crushing and contamination during transfer and installation into the filtration assembly. - Verify filtration and PPI configuration
Verify that both the filtration rating and PPI value match the assembly requirements before final installation. - Install the sheet
Install the sheet into the assembly while maintaining alignment and avoiding concentrated loads on the porous areas. - Clean after service
Clean the sheet after service using backflushing, steam, ultrasonic, or a compatible chemical procedure matched to the process medium.
What is the difference between the PPI rating and the micron filtration rating for this sintered titanium foam sheet, and how do they relate?
The PPI (pores per inch) describes the cellular structure density, while the micron value describes the filtration precision. For this sheet, 30 PPI corresponds to approximately 0.85 mm cell spacing and 35–45% porosity, while the 100 µm filtration rating indicates the particle size retained. Both values must be reviewed together when matching the sheet to an assembly.
Can this 160×160×10 mm titanium foam sheet be cut, welded, or machined for custom assembly integration?
Yes, the metallic construction supports cutting, welding, and basic machining for assembly integration. However, the porous surface must be protected from crushing and contamination during handling. Custom dimensions are also available upon consultation.
What are the recommended cleaning procedures for this sintered porous titanium foam sheet to maintain its filtration performance?
The sheet can be cleaned using backflushing, steam, ultrasonic, or compatible chemical procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination. The sheet's corrosion resistance and thermal stability (≤300°C) support these cleaning methods.
This 160 × 160 × 10 mm sintered porous titanium foam sheet combines a 100 µm filtration rating with a 30 PPI cellular structure, offering 35–45% porosity and interconnected flow paths for solid-liquid, gas-solid, and gas-liquid separation. Its metallic construction provides corrosion resistance, thermal stability up to 300°C, and cleanability, but requires careful handling to avoid surface damage and verification of media compatibility before deployment.
Positive
- Interconnected porous structure: The 35–45% porosity with interconnected passages supports low flow resistance and efficient solid-liquid, gas-solid, and gas-liquid separation, making it suitable for filtration and flow-distribution applications.
- Corrosion and thermal resistance: Titanium-based construction provides corrosion resistance and heat tolerance up to 300°C, enabling use in demanding chemical, petrochemical, and high-temperature process environments.
Trade-offs
- Surface damage vulnerability: The porous surface must be protected from crushing and contamination during handling and installation, as mechanical damage could compromise filtration integrity and flow uniformity.
- Media compatibility verification required: Operating pressure, temperature, and media compatibility must be reviewed before installation, as the titanium structure may not be suitable for all chemical environments or extreme conditions.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
