|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 120 × 120 × 10 mm, 40 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
The sheet must be protected from crushing and contamination to preserve its porous structure and filtration integrity. Media compatibility, operating pressure, temperature, and target flow must be reviewed before installation to prevent degradation or failure.
- Temperature Limit: Recommended service temperature does not exceed 300°C to avoid structural degradation.
- Cleaning Compatibility: Cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures depending on the process medium.
- Machining Constraint: Metallic construction supports cutting, welding, and basic machining for assembly integration without compromising the porous structure.
Inspect the sheet for visible damage or contamination before installation. Confirm media compatibility, operating pressure, and temperature against the sheet's specifications to ensure safe operation.
Required Equipment: Ultrasonic cleaner or backflushing system, Standard machining tools (cutting, welding, drilling)
- Inspect the sheet
Inspect the porous titanium sheet for any visible damage, deformation, or contamination before installation. - Verify compatibility
Verify that the process medium, operating pressure, and temperature are within the sheet's specified limits to prevent corrosion or structural failure. - Install the sheet
Install the sheet into the filtration assembly using appropriate sealing methods to avoid bypass flow around the edges. - Clean the sheet
Clean the sheet using backflushing, steam, ultrasonic, or compatible chemical methods according to the process medium and operating procedure. - Store the sheet
Store the cleaned sheet in a dry, clean environment with the porous surface protected from crushing or contamination.
How does the 40 PPI pore density relate to the 100 µm filtration rating on this titanium foam sheet?
The 40 PPI (pores per inch) describes the cellular structure's pore density, while the 100 µm rating indicates the filtration precision (particle retention size). These are independent parameters; the sheet is designed to provide both a specific pore density and a specific filtration rating. The source notes that both values should be reviewed together when matching the sheet to an assembly.
What is the maximum service temperature and material compatibility for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. The sheet is made from titanium or titanium-alloy, offering corrosion resistance and thermal stability in compatible media. Media compatibility, operating pressure, and temperature should be reviewed before installation.
What cleaning methods are recommended for this porous titanium sheet to maintain its filtration performance?
The source recommends protecting the porous surface from crushing and contamination. Acceptable cleaning methods include backflushing, steam, ultrasonic, and compatible chemical procedures, depending on the process medium and operating procedure.
This 100 µm, 40 PPI sintered porous titanium foam sheet in a 120 × 120 × 10 mm format provides an interconnected 35–45% porosity structure with low flow resistance for liquid and gas separation duties, while its ≤300°C service ceiling and crush-sensitive porous surface require up-front media-compatibility and handling validation.
Positive
- Interconnected porous flow structure: The 35–45% porosity with approximately 0.64 mm cell spacing at 40 PPI preserves interconnected through-pores, providing low flow resistance for solid-liquid, gas-solid, and gas-liquid separation.
- Cleanable and machinable metallic media: The sintered titanium framework supports backflushing, steam, ultrasonic, and compatible chemical cleaning, and its metallic construction permits cutting, welding, and basic machining for assembly integration.
Trade-offs
- Limited recommended service temperature: Recommended service temperature is ≤300°C, so the sheet must not be installed in higher-temperature processes without confirming compatibility with the operating envelope.
- Surface protection and compatibility review required: The porous surface must be protected from crushing and contamination, and media compatibility, operating pressure, target flow, and dimensional tolerance must be reviewed before installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
