|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 120 × 120 × 10 mm, 20 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sheet must be protected from crushing and contamination during handling to preserve its porous structure. Operating temperature should not exceed 300°C, and media compatibility must be verified before use.
- Temperature Limit: The recommended service temperature is ≤300°C to avoid structural degradation.
- Surface Protection: Protect the porous surface from crushing and contamination to maintain filtration performance.
- Cleaning Compatibility: Backflushing, steam, ultrasonic, and compatible chemical cleaning procedures are acceptable.
- Machining Allowance: The metallic construction supports cutting, welding, and basic machining for assembly integration.
- Pre-Installation Review: Confirm filtration rating, dimensions, media compatibility, pressure, temperature, and flow before installation.
This procedure outlines the correct handling and cleaning steps to maintain the integrity and filtration performance of the sheet. The sheet must be protected from physical damage and cleaned using appropriate methods based on the process medium.
Required Equipment: Backflushing system, Steam cleaner, Ultrasonic cleaner
- Inspect the sheet
Inspect the sheet for visible damage or contamination before handling. - Protect the surface
Protect the porous surface from crushing or impact during transport and assembly. - Select a cleaning method
Select a cleaning method based on the process medium and operating procedure. - Perform cleaning
Perform cleaning using backflushing, steam, ultrasonic, or compatible chemical procedures. - Verify compatibility
Verify the cleaning procedure is compatible with the titanium material and does not exceed temperature limits.
What is the difference between the 100 µm filtration rating and the 20 PPI pore density on this sintered titanium foam sheet?
The 100 µm filtration rating refers to the particle size that the sheet can retain, while the 20 PPI (pores per inch) describes the cellular structure's pore density. The sheet has a 35–45% porosity with interconnected passages, and an approximate cell spacing of 1.27 mm. Both values must be reviewed together when matching the sheet to a filtration assembly, as PPI defines the structural framework and the micrometre value defines the filtration precision.
Can this 120×120×10 mm sintered titanium foam sheet be cut, welded, or machined for custom assembly integration?
Yes, the titanium-based metallic construction supports cutting, welding, and basic machining for assembly integration. The sheet is supplied as a 120×120×10 mm piece and can be modified to fit custom envelopes, though care should be taken to protect the porous surface from crushing and contamination during processing.
What cleaning methods are recommended for this porous titanium foam sheet, and what precautions are needed to maintain its filtration performance?
Recommended cleaning methods include backflushing, steam, ultrasonic cleaning, and compatible chemical procedures, depending on the process medium and operating procedure. The porous surface should be protected from crushing and contamination to preserve the interconnected flow paths and filtration integrity. The sheet's metallic structure supports repeated cleaning and reuse within compatible process conditions.
This 100 µm, 20 PPI sintered titanium foam sheet (120×120×10 mm) offers a 35–45% porous interconnected structure with low flow resistance and corrosion resistance up to 300°C, but requires careful media compatibility assessment and delicate handling to prevent surface damage.
Positive
- Interconnected porous structure with low flow resistance: The sintered titanium foam sheet features 35–45% porosity with interconnected passages, enabling low flow resistance and effective solid-liquid or gas-liquid separation while maintaining structural integrity.
- Corrosion resistance and thermal stability up to 300°C: The titanium-based construction offers corrosion resistance in compatible media and thermal stability up to 300°C, allowing use in demanding chemical and petrochemical processes.
Trade-offs
- Requires media compatibility and operating condition review: The porous titanium sheet must be carefully matched to the process media, operating pressure, temperature, and flow rate to avoid material degradation or performance failure; the procurement checklist emphasizes compatibility review before installation.
- Susceptible to crushing and contamination without proper handling: The porous structure is vulnerable to physical crushing and contamination during handling or installation; prescribed cleaning methods (backflushing, steam, ultrasonic) are necessary but may not be suitable for all process media.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
