|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 100 × 100 × 5 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document records handling and service constraints for the Atomfair sintered porous titanium foam sheet model AF-T110-A05100. It defines surface protection, cleaning, and compatibility checks required before installation.
- Surface protection: Protect the porous surface from crushing and contamination during handling, storage, and installation.
- Compatibility verification: Confirm media compatibility, operating pressure, temperature, target flow, and dimensional tolerance before installation.
- Cleaning constraints: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
- Service temperature: Keep service temperature within the manufacturer's recommended limit for the material and assembly.
- Pore-density and filtration matching: Evaluate pore density and filtration rating together when matching the sheet to an assembly.
These steps describe installation-readiness review and surface-protection measures for the sintered porous titanium foam sheet. Follow them before mounting the sheet in a filtration or separation assembly.
- Confirm assembly requirements
Verify the sheet's filtration rating, pore density, dimensions, material grade, and target flow against the assembly requirements before installation. - Protect porous surface
Protect the porous surface from crushing and contamination during handling, storage, and installation. - Match structural and filtration parameters
Match the sheet to the assembly by reviewing pore density and filtration rating together with operating pressure and media compatibility. - Select cleaning method
Select the cleaning method based on the process medium from backflushing, steam, ultrasonic, or compatible chemical procedures. - Maintain service limits
Confirm the installed assembly remains within the stated operating pressure, temperature, and media compatibility limits during service.
How does the 110 PPI pore density relate to the 100 µm filtration rating in this sintered titanium foam sheet?
The 110 PPI (pores per inch) defines the cellular structure density, while the 100 µm rating specifies the particle size retained. The sheet has approximately 0.23 mm cell spacing with 35–45% porosity, providing interconnected flow paths. Higher PPI generally increases filtration precision but may reduce flow; the 100 µm/110 PPI combination balances filtration and permeability for applications like water treatment and chemical processing.
What is the maximum operating temperature and typical flow resistance of this 100 µm titanium foam sheet?
The recommended service temperature is ≤300°C. The air permeability range is 1.5–800 m³/(h·m²·kPa), indicating that flow resistance varies with pore structure and media. The 35–45% porosity and 0.23 mm cell spacing contribute to low flow resistance, but actual pressure drop depends on fluid viscosity, flow rate, and contamination level. Confirm operating conditions with the technical team before installation.
What cleaning methods are recommended for this porous titanium foam sheet to avoid structural damage?
The manufacturer recommends backflushing, steam cleaning, ultrasonic cleaning, or compatible chemical procedures depending on the process medium. The porous surface must be protected from crushing and contamination to preserve the 110 PPI cellular structure. Avoid aggressive mechanical abrasion and always follow the operating procedure; consult the technical team for specific cleaning protocols.
This 100 µm, 110 PPI sintered titanium foam sheet in a 100 × 100 × 5 mm format provides an interconnected porous structure with 35–45% porosity, suited for lab-scale filtration and separation trials requiring corrosion resistance and cleanability up to 300°C.
Positive
- High-porosity interconnected flow paths: The 35–45% porosity and approximately 0.23 mm cell spacing create interconnected through-pore channels that support solid-liquid, gas-solid, and gas-liquid separation with low flow resistance.
- Corrosion-resistant and cleanable metallic structure: The sintered titanium framework provides corrosion resistance and thermal stability in compatible media, and supports backflushing, steam, ultrasonic, or chemical cleaning for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C; process streams above this limit require alternative porous media or engineering review.
- Porous surface vulnerable to crushing and contamination: The open porous surface must be protected from crushing and contamination; cleaning method (backflushing, steam, ultrasonic, or chemical) must match the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
