|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 100 × 100 × 5 mm, 30 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This document defines the operational constraints for the sintered titanium foam sheet. Compliance reduces the risk of media incompatibility, surface damage, and premature fouling.
- Media Compatibility Review: Confirm that the process medium is compatible with the titanium or titanium-alloy porous structure before installation.
- Pressure and Temperature Limits: Verify that operating pressure and temperature remain within the recommended service temperature limit of 300 degrees Celsius before use.
- Surface Protection: Protect the porous surface from crushing and contamination during handling, storage, and assembly.
- Cleaning Method Selection: Select backflushing, steam, ultrasonic, or compatible chemical cleaning according to the process medium and operating procedure.
These steps cover the minimum handling and preparation required before placing the sintered titanium foam sheet into service. Follow the order given to preserve the porous structure and avoid contamination.
- Confirm Operating Conditions
Verify filtration rating, PPI, sheet dimensions, material grade, target flow, operating pressure, temperature, and media compatibility before installation. - Protect the Porous Surface
Protect the porous surface from crushing and contamination during handling and installation. - Select a Cleaning Method
Select a cleaning method appropriate for the process medium and operating procedure from backflushing, steam, ultrasonic, or compatible chemical cleaning.
How does the 30 PPI pore density relate to the 100 µm filtration rating in this sintered titanium foam sheet?
The 30 PPI (pores per inch) corresponds to an approximate cell spacing of 0.85 mm, defining the macroporous cellular structure, while the 100 µm filtration rating specifies the particle retention size. The 35–45% porosity and interconnected through-pore network allow the sheet to achieve both coarse structural support and fine particle filtration within its general filtration range of 0.45–100 µm.
What are the maximum operating temperature and media compatibility constraints for this sintered titanium foam sheet?
The recommended maximum service temperature is 300°C. Media compatibility must be confirmed for each application; the titanium construction provides corrosion resistance in compatible media, but operating pressure, temperature, target flow, and dimensional tolerance should be reviewed before installation.
What cleaning and handling procedures are recommended for maintaining the porous titanium foam sheet's performance?
The sheet should be handled to avoid crushing or contaminating the porous surface. Cleaning options include backflushing, steam, ultrasonic, or chemical methods appropriate for the process medium. The metallic construction also supports cutting, welding, and basic machining for assembly integration.
This 100 × 100 × 5 mm sintered titanium foam sheet combines a 100 µm filtration rating with a 30 PPI cellular structure and 35–45% porosity, providing interconnected flow paths suitable for laboratory filtration, porous-electrode, flow-distribution, and thermal-management studies. Its titanium metallurgy offers corrosion resistance and cleanability up to 300°C service, while the porous surface requires crush protection and process-specific cleaning procedures.
Positive
- Interconnected porous flow network: The 35–45% porosity titanium framework with approximately 0.85 mm cell spacing provides interconnected through-pores for solid-liquid, gas-solid, and gas-liquid separation while maintaining low flow resistance and uniform pore distribution.
- Corrosion-resistant, cleanable metallic media: The sintered titanium structure offers corrosion resistance and heat tolerance up to 300°C service, with cleaning options including backflushing, steam, ultrasonic, and compatible chemical procedures for reuse.
Trade-offs
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, so higher-temperature process streams require alternative media; operating pressure, temperature, and media compatibility must be reviewed before installation.
- Porous surface requires crush protection: The porous structure must be protected from crushing and contamination during handling and cleaning, and the cleaning method must be selected according to the process medium and operating procedure.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
