|
Sintered Titanium and Porous Titanium Foam Sheet, 100 µm Filtration Rating, 100 × 100 × 3 mm, 110 PPI, 1 Piece
Research-grade laboratory product
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||
|
LABORATORY PROCUREMENT SUPPORT
For filtration accuracy, dimensional confirmation, material compatibility or custom configuration review, contact our technical sales team.
E-MAIL: inquiry@atomfair.com
|
|||||||||||||||||||||||||||||||||||||||||||||
|
Manufacturer: Atomfair LLC
Brand: ATOMFAIR®
|
This sintered porous titanium sheet requires protection from surface crushing and contamination to maintain its filtration integrity. Media compatibility, operating pressure, temperature, and flow must be reviewed before installation.
- Surface Protection: Protect the porous surface from crushing and contamination to avoid compromising the filtration structure.
- Cleaning Compatibility: Select backflushing, steam, ultrasonic, or chemical cleaning methods based on the process medium and operating procedure.
- Service Temperature Limit: Do not exceed the recommended service temperature of 300°C to prevent degradation of the porous structure.
- Media Compatibility Review: Confirm media compatibility with the titanium or titanium alloy before use in corrosive or reactive environments.
This procedure outlines safe handling and cleaning steps for the sintered porous titanium sheet to preserve its filtration performance. Follow these steps to avoid surface damage and ensure effective cleaning.
Required Equipment: Clean, lint-free gloves, Ultrasonic bath or backflushing equipment, Compatible chemical cleaning agents
- Inspect the sheet
Inspect the sheet for any visible damage or contamination before handling. - Wear protective gloves
Wear clean, lint-free gloves to prevent oils or debris from contaminating the porous surface. - Handle by edges
Handle the sheet by its edges to avoid crushing or denting the porous structure. - Select cleaning method
Select a cleaning method based on the process medium and operating procedure, such as backflushing, steam, ultrasonic, or chemical cleaning. - Apply cleaning procedure
Apply the chosen cleaning procedure, ensuring the cleaning agent is compatible with titanium. - Rinse thoroughly
Rinse the sheet thoroughly with clean water or solvent to remove any cleaning residues. - Dry and store
Dry the sheet completely and store it in a clean, dry environment to prevent contamination.
How does the 110 PPI pore density relate to the 100 µm filtration rating, and why should both be considered together?
The 110 PPI (pores per inch) describes the cellular structure density, while the 100 µm value specifies the filtration precision for particle retention. The product description explicitly states that PPI describes the cellular structure and the micrometre value describes filtration precision, and both should be reviewed together when matching the sheet to an assembly. The sheet has a cell spacing of approximately 0.23 mm and a porosity of 35–45%, ensuring interconnected flow paths.
What are the maximum operating temperature and media compatibility constraints for this sintered titanium foam sheet?
The recommended service temperature is ≤300°C. Media compatibility, operating pressure, temperature, target flow, and dimensional tolerance must be reviewed before quotation or installation. The titanium construction provides corrosion resistance and thermal stability in compatible media, but specific media compatibility depends on the process conditions and should be confirmed with the supplier.
What cleaning methods are recommended for this porous titanium sheet, and what precautions should be taken during handling?
Cleaning options include backflushing, steam, ultrasonic, and compatible chemical procedures, chosen according to the process medium and operating procedure. The porous surface must be protected from crushing and contamination. The metallic construction supports cutting, welding, and basic machining for assembly integration, but care should be taken to avoid damaging the porous structure.
This 100 × 100 × 3 mm sintered titanium foam sheet pairs a 110 PPI cellular structure with a 100 µm filtration rating and 35–45% interconnected porosity, yielding a low-resistance metallic filtration medium for laboratory separation trials. Its 300°C service ceiling and the need to protect the porous surface from crushing and contamination define the main deployment constraints.
Positive
- 100 µm rating in 110 PPI foam: The 110 PPI sintered titanium structure provides interconnected through-pores with approximately 0.23 mm cell spacing and 35–45% porosity, supporting stable 100 µm solid-liquid and gas-solid separation.
- Reusable corrosion-resistant metal media: The titanium framework offers low flow resistance, corrosion resistance, and heat tolerance in compatible media, while backflushing, steam, ultrasonic, and chemical cleaning options enable repeated service.
Trade-offs
- Porous surface needs handling protection: The open 35–45% porosity foam surface must be shielded from crushing and contamination; cleaning method should be matched to the process medium and operating procedure.
- Service temperature limited to 300°C: Recommended service temperature is ≤300°C, and media compatibility, operating pressure, target flow, and dimensional tolerance must be confirmed before quotation or installation.
Every advanced material, component, equipment, and instrument in our catalog is backed by rigorous testing. We maintain strict internal quality management frameworks and align with CE conformity metrics to deliver transparent, reproducible performance data via our public open-science repository.
To request raw batch performance data, submit formal vendor registration paperwork, or execute a fast-turnaround R&D manufacturing loop, contact us at inquiry@atomfair.com.
Item is dispatched under the Atomfair Shipping & Delivery Framework (Free worldwide shipping on orders over $59 USD excl. heavy equipment). Return is governed by the Atomfair Return & Refund Policy (7-day technical return window).
